IBM PROJECTOR C400 manual Osd

Page 58

Table B-1. Troubleshooting (continued)

Problem

Solution

 

 

The image is blurred

v Adjust the Focus on the projector.

 

v Press the Auto button on the remote control or the

 

projector.

 

v Ensure the projector-to-screen distance is within the

 

range specified.

 

v Check that the projector lens is clean.

 

v Make sure the output resolution from the PC is 1024

 

x 768, the native resolution of the projector.

 

 

The image is wider at the top or

v Position the projector so it is as perpendicular to the

bottom (trapezoid effect).

screen as possible.

 

 

v Use the Keystone button on the remote control or

 

projector to correct the problem.

 

 

The image is reversed or upside

Check the Projection setting on the Setup menu of the

down.

OSD.

 

 

The image is streaked.

v Set the Frequency and Tracking settings on the Setup

 

menu of the OSD to the default settings.

 

v To ensure the problem is not caused by a connected

 

PC’s video card, connect to another computer.

 

 

The image is flat with no contrast

Adjust the Contrast setting on the Main menu of the

 

OSD.

 

 

The color of the projected image

Adjust the Color Temp. and Gamma settings on the

does not match the source image

ColorMgr menu of the OSD.

 

 

There is no light from the

v Check that the power cable is securely connected.

projector

v Ensure the power source is good by testing with

 

 

another electrical device.

 

v Restart the projector in the correct order and check

 

that the Power LED is green.

 

v If you have replaced the lamp recently, try resetting

 

the lamp connections. Make sure the lamp cover is

 

flush with the projector case when closed.

 

v Replace the lamp module.

 

v Put the old lamp back in the projector and have the

 

projector serviced.

 

 

The lamp goes off.

v Power surges can cause the lamp to turn off. Press

 

the Power button twice to turn off the projector.

 

When the Lamp Ready LED is on, press the Power

 

button.

 

v Replace with a new lamp module.

 

v Put the old lamp back in the projector and have the

 

projector serviced.

 

 

B-2IBM C400 PROJECTOR: User’s Guide

Image 58
Contents IBM C400 Projector Page IBM C400 Projector Page Contents Iv IBM C400 Projector User’s Guide Safety information Vi IBM C400 Projector User’s Guide Service General safety guidelinesPower cords and power adapters Plugs and outlets Extension cords and related devicesBatteries CD and DVD drive safety Heat and product ventilationIBM C400 Projector User’s Guide Registering your option Xii IBM C400 Projector User’s Guide Packing checklist Product descriptionStandard Accessories Projector features Front view of projectorSide view of projector Rear view of projector Bottom view of projector Starting the projector Setting up the projectorTurning off the projector Positioning the projector Image height Adjusting the projector level and height Adjusting the imageAdjusting the volume 6IBM C400 Projector User’s Guide Connecting devices to the projector Connecting devicesConnecting to a USB device Connecting to a computer monitorUsing the projector features Before you beginUsing the remote control Figure below provides an illustration of the remoteProjector and remote control buttons Operating range4IBM C400 Projector User’s Guide Language On-Screen Display menu controlsNavigating the OSD Quality menuDescription Default Properties menu Options menu Setup menu OSDSetup Menu with single input Information menu AGCNetwork Setting menu DescriptionDescription 10IBM C400 Projector User’s Guide Remote network operation Remote interface overview2IBM C400 Projector User’s Guide Remote network operation Setting up remote operation Using the Dhcp address settings Enabling and disabling passwords Click IP SettingsSetting the maximum connections Retrieving a forgotten password Remote network operation 10IBM C400 Projector User’s Guide Cleaning the lens Appendix A. MaintenanceCleaning the projector Cleaning the case2IBM C400 Projector User’s Guide Resetting the lamp timer Using the security slot Tips for troubleshooting Appendix B. TroubleshootingCommon problems and solutions Troubleshooting informationOSD Projector LEDs Lamp-ready LED number of flashes Explanation4IBM C400 Projector User’s Guide Appendix C. Specifications Following are specifications for the IBM C400 projector2IBM C400 Projector User’s Guide Online technical support Appendix D. Service and SupportTelephone technical support Country or Region Telephone Number Appendix D. Service and Support D-3 4IBM C400 Projector User’s Guide What this Warranty Does not Cover Part 1 General TermsExchange of a Machine or Part How to Obtain Warranty ServiceWhat IBM Will Do to Correct Problems Your Additional ResponsibilitiesLimitation of Liability Governing LawPart 2 Country-unique Terms North America UruguayVenezuela CanadaIndia JapanPEOPLE’S Republic of China PRC MalaysiaNEW Zealand PhilippinesFollowing Terms Apply to ALL Emea Countries Arbitration The following is added under this heading European Union EU ConsumersEgypt FranceHungary GermanyIreland Slovakia Items for Which IBM is Not LiableUnited Kingdom C400 Projector Part 3 Warranty InformationTypes of Warranty Service C400 Projector LampCustomer Carry-In or Mail-In Service On-site ServiceCourier or Depot Service CRU and On-site Service16IBM C400 Projector User’s Guide Country or Region Telephone Number 18IBM C400 Projector User’s Guide Appendix F. Guarantee supplement for Mexico 2IBM C400 Projector User’s Guide Appendix G. Notices Electronic emission notices TrademarksFederal Communications Commission FCC statement Deutsche EMV-Direktive electromagnetische Verträglichkeit Industry Canada Class B emission compliance statementAvis de conformite a la reglementation d’Industrie Canada European Union emission directiveUnione Europea Directiva EMC Conformidad électromagnética Union Européenne Directive Conformité électromagnétiqueUnion Europea Normativa EMC Appendix G. Notices G-5 6IBM C400 Projector User’s Guide Page Part Number 73P3195