Fujitsu D2529 Features, Overview, Processors, Main memory, Chips on the system board

3 Features

3.1Overview

Processors

–1 or 2 dual or quad core Intel® Xeon™ processors

–2 processor sockets LGA771 for dual core Intel® Xeon™ processors

–1x6, 2x6, 2x4 or 4 MB Second-Level-Cache (on-die unified, 64 byte cache- line size)

–32 KB L1 Cache (on-die, data per core)

–32 KB L1 Cache (on-die, instruction per core)

–2 x 266 MHz or 333 MHz data bus (equals FSB 1066 or 1333: quadruple data rate (or quad pumping) delivers 4 bits of data per clock cycle)

–2 VRM 11.0 onboard (EVRD)

Main memory

–2 sots for memory riser cards with 8 PCI slots each

–FBD PC2-4200F or FDB PC2-5300F Fully Buffered DIMM memory modules with 512 MB, 1 Gbyte, 2 Gbyte and 4 Gbyte

–Maximum 64 Gbyte

–Minimum 1 Gbyte

–Maximum 4x8 Gbyte/s bandwidth

–Supports 4 FBD memory channels

–ECC multiple bit error detection and single bit error correction

–Memory scrubbing function

–Single Device Data Correction (SDDC) function (Chipkill™)

–Mirroring

–Sparing

Chips on the system board

–Intel® Blackford chip set (Intel 5000P chipset)

–Single-channel Gigabit LAN controller (Broadcom 5708C)

–Super I/O controller (SMSC 47M107)

–Flash EPROM for:

–local BIOS; flashable via bootable USB device, LAN or optional floppy disk

–SMSC8700 Fast Ethernet RMII Phy

–iRMC S2 with integrated VGA graphic controller

D2529 (TX300 S4) Technical Manual 13