Fujitsu D2529 technical manual Led, Anzeige Bedeutung

LEDs Features

DIMM 4B DIMM 4A

DIMM 3B DIMM 3A

DIMM 2B DIMM 2A

DIMM 1B DIMM 1A

DIMM 4D

DIMM 4C

DIMM 3D

DIMM 3C

DIMM 2D

DIMM 2C

DIMM 1D

DIMM 1C

L

Figure 6: LEDs on the riser card

LED s A, B and C are visible from outside on the rear of the server. All the other LEDs are only visible, if the cover of the server has been opened.

If the server has been powered off (power-plugs must be disconnected) it is possible to indicate the faulty component by pressing the indicate CSS button.

The LEDs have the following meaning:

LED	Anzeige	Bedeutung
A - CSS	yellow	indicates a prefailure
(Customer Self
	yellow flashing	indicates a failure
Service)
B - GEL	orange	indicates a prefailure
(Global Error
	orange	indicates a failure. Reasons for a failure
LED)
	flashing	may be:
		- overheating of one of the sensors
		- sensor defect
		- fan defect
		- CPU error
		- voltage incorrect
		- Software detected an error
C - Identification	blue	server is identified via ServerView

26 Technical Manual D2529 (TX300 S4)