Features | Interfaces and connectors |
LAN connectors
The system board is populated with three LAN controllers.
–2 Gigabit LAN controllers (BCM5708) for system LAN 1 and system LAN 2 System LAN 1 and system LAN 2 support:
–transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s
–WOL function through Magic Packet™
–Intel PXE. It is possible to boot tehe system without its own boot hard disk via LAN.
In addition system LAN 1 can be used as shared service LAN.
–1 dedicated service LAN controller
–supports the transfer rates of 10 Mbit/s and 100 Mbit/s
–serves as management interface
–is prepared for RemoteView
The LAN connectors are equipped each with two LEDs (light emitting diode) indicating the transfer rate and the activity.
LED 2 |
|
|
|
|
|
|
|
|
| LED 1 |
Figure 9: LAN connector single-channel Gigabit LAN controller
LAN 1 | LAN transfer | green + | off | transfer rate 10 Mbit/s | ||
| rate | yellow |
|
| ||
|
|
|
|
|
|
|
|
|
| green | on | transfer rate 100 Mbit/s | |
|
|
|
|
|
|
|
|
|
| yellow | on | transfer rate 1000 Mbit/s | |
|
|
|
|
|
| |
LAN 2 | LAN | green | on | LAN connection | ||
| link/activity |
|
|
|
| |
|
|
| off | no LAN connection | ||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| flashing | LAN transfer |
|
|
|
|
|
|
|
D2529 (TX300 S4) | Technical Manual | 31 |