Fujitsu D2529 PCI slot Bit Frequency Description MHz, PCI, PCI-X, PCI Express interrupts

Page 21

Features

PCI(e) slots

PCI slots

The following table shows an overview of the PCI slots:

PCI slot

Bit

Frequency

Description

 

 

in MHz

 

 

 

 

 

1

 

 

PCI e x4 slot

 

 

 

 

2

 

 

PCI e x4 slot

 

 

 

 

3

 

 

PCI e x4/x8 slot

 

 

 

 

4

64 Bit

133

64-Bit PCI-X slot

 

 

 

 

5

 

 

PCI e x4 slot

 

 

 

 

6

 

 

PCI e x4/x8 slot

 

 

 

 

7

 

 

PCI e x4 slot

 

 

 

 

Slot 3 and slot 6 are automatically used as x8 slots, if slot 2 respectivly slot 5 are not occupied.

PCI, PCI-X, PCI Express interrupts

Each device connected to a PCI bus or PCI Express can use up to four interrupt signals depending on the functionality.

PCI and PCI-X buses use four lines named INTA to INTD, typically connected to all devices on the bus in order to periodically balance interrupt load. An interrupt signal may thereby be used simultaneously by multiple devices (interrupt sharing).

PCI Express devices send their interrupts through messages. The interrupts are defined by the system design.

D2529 (TX300 S4)

Technical Manual

21

Image 21
Contents System Board D2529 for TX300 S4 Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…Contents Page Notational conventions IntroductionPage Important notes Batteries ESD label CE Certificate CE CertificateEnvironmental Protection Important notesEnvironmentally friendly product design and development Returning, recycling and disposal Environmental ProtectionOverview FeaturesProcessors Main memoryExternal connectors Internal connectorsOverview PCI slotsBios features FeaturesCSS Customer Self Service Form factorOverview Slots for riser cards Main memoryModule population Dimm C/DMirrored mode Non-mirrored modeRiser card A/B Riser card C/D Alternating PopulationSparing mode PCIe slotsPCIe slots PCI, PCI-X, PCI Express interrupts PCI slot Bit Frequency Description MHzAssignment of the PCI interrupts Slot/device Property InterruptsignalTemperature / system monitoring Screen resolutionScreen resolution Max. color depth Max. frequency Temperature monitoringPrimergy Diagnostic LEDs Temperature / system monitoringFan speed control Sensor monitoringLEDs LEDsAnzeige Bedeutung LEDCPU Interfaces and connectors Interfaces and connectors= SATA4 External ports LAN connector single-channel Gigabit LAN controller LAN connectorsSettings with DIP switches Settings with DIP switchesRecovering System Bios recovery switch switch Skipping the password query switch Write protection for Flash Bios switchWrite protection for floppy disks switch Settings with DIP switches Replacing the lithium battery Replacing the lithium batteryPage Abbreviations Abbreviations ISCSI IRMCPDA WfM