Interfaces and connectors
The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.
External ports
The positions of the external ports are shown on page "Cover".
|
|
| PS/2 keyboard port, purple |
| Audio input (Line in), light blue |
|
|
| Serial interface, turquoise |
| PS/2 mouse port, green |
|
|
|
|
| |
|
|
| Monitor port, blue |
| Parallel port/Printer, burgundy |
|
|
|
|
| |
LAN |
|
|
| ||
|
|
| |||
LAN connector (optional) |
| USB - Universal Serial Bus, black | |||
| |||||
|
|
| Audio output (Line out), light green |
| Microphone jack (mono), pink |
|
|
|
|
| |
LAN connector
The mainboard is optionally equipped with the Broadcom BCM5751 LAN controller. This LAN controller supports the transfer rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller supports the WOL functionality through Magic PacketTM.
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® BootP and Intel PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
1 
2
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity LED 2 lights up differently depending on the transfer rate:
10 Mbit/s | off |
100 Mbit/s | green |
1000 Mbit/s | yellow |
English - 9 |