Fujitsu D1931 technical manual Bios Recovery Recovering System Bios

Page 38

BIOS Recovery - Recovering System BIOS

BIOS Recovery - Recovering System BIOS

i	All BIOS settings are reset to the default values.

►Open the casing as described in the operating manual.

►Set the switch for "Restore system BIOS" to ON.

►Close the casing as described in the operating manual.

►Insert a BIOS update floppy disk and start the PC.

►Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. This can take a few minutes.

►Open the casing as described in the operating manual.

►Set the switch for "Restore system BIOS" to OFF.

►Close the casing as described in the operating manual.

►Remove the floppy disk from the drive.

►Start the PC and invoke BIOS Setup.

►Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.

►Save the change and terminate BIOS Setup.

The BIOS recovery has now been completed. The system restarts.

i	Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
	("Drivers & Utilities" CD).

28 - English

A26361-D1931-Z120-1-7419, Edition 1

Image 38

Contents

Answers Deutsch / EnglishSie haben Page A26361-D1931-Z120-1-7419 Ausgabe Mai May 2004 edition Mainboard D1931Technisches Handbuch Technical Manual Page Bedienfeld / Front panel Externe Anschlüsse / External connectorsÜbersicht/Overview Mainboard D1931 Page Contents Page Notational conventions Additional informationImportant notes Information about boardsSpecial onboard features List of featuresOnboard features Internal portsExternal ports Special features Safe Standby Installation Brief instructions on installing mainboardPrior to installation Driver installation Brief instructions on installing mainboardExternal ports Interfaces and connectorsLAN connector Screen resolution Internal ports and connectorsTechnical data Graphics portAudio front panel Pin assignment of internal ports Front panelSerial ATA ATA interface Audio S/PDIFAudio port front Power control system monitoringAudio Input USB dual channel Chipcard reader ready Fan 1, 2Power supply BTX Additional power supply ATX12Skipping system and Bios Setup password pinpair a Jumper settingsSetting via control-panel plug connector Recovering System Bios pinpair BReplacing processor Installing processor with heat sinkAdd-on modules / Upgrading Replacing processor Mounting heat sink Upgrading main memory Installing a memory module Removing a memory modulePCI bus interrupts Selecting correct PCI slot Adding PCI Express cardsAdding PCI cards Monofunctional expansions cards PCIe USB 2,0 SMBus Audio On board controller AC97 USB 1,1 PCI slot AC97 HD AudioReplacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateWhen should a Bios update be carried out? Bios Recovery Recovering System Bios When should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers Loadability for connections and fuses AnnexElectrical Properties Mainboard current requirementAPM and Acpi system status, energy-saving modes APM and Acpi system status, energy-saving modesMainboard Revision Mainboard Revision and Bios VersionBios version Error messages Bios update for installed CPU failedError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary SimdGlossary