IBM 4SA, 9TX, 9TS, 9QX, 9QS, 900, 4SB, 42P NetBAY server dual-cord Power Distribution Unit introduction

Length	Cable rating	Plug type	Cable part #
1 m (3.3 ft)	250 V, 16 A	IEC 320-C19 to IEC 320-C20	00N7698

NetBAY server dual-cord Power Distribution Unit introduction

The IBM NetBAY Server Dual-cord Power Distribution Unit is part of the Rack Modular Power Distribution Unit (M/PDU) family and enables you to connect one server to two dedicated, independent, and redundant power sources, such as an electrical outlet and an uninterruptable power supply (UPS). The Rack PDU has two power inlets, for Main and Backup power connections, and four IEC standard power outlets.

Notes:

1.You will have some unused parts depending upon how you install the Rack PDU.

2.When you install two Rack PDUs you will need some parts from both options.

3.You can install other M/PDU family devices next to your Rack PDU using mounting hardware from both devices.

You can install the Rack PDU vertically in the side of your rack cabinet, or horizontally within 1U of EIA mounting space in your rack cabinet. The mounting hardware that comes with this option enables you to install one Rack PDU next to another in the same mounting space within your rack cabinet.

The following parts come with the Rack PDU:

•One Rack PDU

•Two line cord (some models come with two high voltage and two low voltage line cords)

•One vertical mounting plate

•One vertical-mounting cable-management bracket

•One horizontal mounting bracket

•One single-device attachment bracket (for horizontal-mount installations)

•One dual-device attachment bracket (for horizontal-mount installations)

•One 1U blank filler panel (for horizontal-mount installations)

•Miscellaneous hardware kit (for attaching brackets and installing the device in a rack cabinet)

•Cable straps

•Installation documentation

166Hardware Maintenance Manual: IBM PC Server/Enterprise Racks