Scanning to
How do I create an e-mail shortcut?
1From your computer, enter the IP address of the MFP you want to scan to in the URL field (address bar) of your Web browser.
2Click Configuration (in the left frame) and then click Manage Destinations (in the right frame).
Note: You may be asked to enter a password. If you do not have an ID and password, get one from your administrator.
3Click E-mail Destination Setup.
4Enter a unique name for the recipient and specify the
Note: If you are entering multiple addresses, make sure you separate each address with a comma (,).
5Choose your scan settings (Format, Content, Color, and Resolution).
6Enter a shortcut number and then click Add. If you enter a number that is already in use, you are prompted to select another number.
7Walk over to the MFP and load your original document.
8Use the numeric keypad to enter your shortcut number.
9Press Start to send your job.
How do I create a FTP shortcut?
1From your computer, enter the IP address of the MFP you want to scan to in the URL field (address bar) of your Web browser.
2Click Configuration (in the left frame) and then click Manage Destinations (in the right frame).
3Click FTP Destination Setup.
4Enter a unique name for the recipient and specify the FTP address.
5Choose your scan settings (Format, Content, Color, and Resolution).
6Enter a shortcut number and then click Add. If you enter a number that is already in use, you are prompted to select another number.
7Walk over to the MFP and load your original document.
8Use the numeric keypad to enter your shortcut number.
9Press Start to send your job.
How do I create an
44