IBM WS525 manual Monitor Requirements, Keyboard, Electrical Requirements, Operating Temperature

Page 38

Speciﬁcations

Electrical Requirements
AC input voltage	101, 110, 120, 220, 230, 240 Vac auto-sensing
	single phase, 3-wire
Line frequency	47 Hz to 63 Hz
Power consumption	15 watts maximum
Operating Temperature	10°C to 40°C (50°F to 104°F)
Humidity	10% to 90% relative humidity
	Maximum wet bulb = 28°C
	Minimum dew point = 2°C (noncondensing)

Monitor Requirements

The WS525 requires a multisync monitor that supports VGA 72 Hz (37.8 KHz horizontal scan rate), with a 15-pin, D-Sub connector. Typically most monitors today meet these requirements.

Keyboard

The terminal is designed to support industry-standard PS/2 compatible keyboards. Due to the large number of keyboard variations, it is not possible to test all of them in advance.

Keyboards from some manufactures may not function correctly due to differences in their implementation of the standard.

Keyboard style	ANSI style layout; enhanced PC 101/102 style
	layout; available for most European languages.
Protocol	IBM enhanced PS/2-compatible
Connector	PS/2-style, 6-pin mini DIN
Keyboard keys	All keys are programmable for single characters,
	character sequences, or local functions.

B–2Speciﬁcations

Image 38

Contents Asynchronous Color Terminals WS525 User Guide Publication Issued by Contents Speciﬁcations Maintenance and TroubleshootingDeﬁning Keys TablesEnvironment PrefaceOverview Before You StartImportant Information Proper Setup and UseConventions ConventionMeaningChair Recommendations for Proper Setup and UseAdjust So that your KeyboardCont Recommendations for Proper Setup and Use AdjustInstallation and Set-Up If desired, install the system box in its standConnect the cables to the monitor InstallationConnect the cables to the system box Keyboards ANSI-Style Keyboard LayoutEntering/Exiting Set-Up Set-UpOverview On a Press Refer toMoving within a Set-Up Menu Menu IndicatesSelect the Set-Up language Default ConﬁgurationCommunications Port Set-Up Screen Using Color If you want to From the Color submenu in Set-Up ChooseRestore Select menu item Save your settingsRestore previously saved settings From the Color submenu in Set-Up, chooseMultiple Sessions At the Local prompt, enter the following command Using a Terminal Server with TD/SMPUsing SSU Host Software Opening Another SessionTips for Using Multiple Sessions Page Desktop Features Invoking Desktop FeaturesFormat Clock featureKey Function Calculator feature KeyFunctionShow Character Sets feature Banner messageCopy and paste Keyboard SummaryAnsi Keyboard PC Keyboard Press Accessibility aid Review previous linesMoving Standard Functions Deﬁning KeysDeﬁne Key Editor Creating a New Function Function KeysCreating a Key Sequence Deﬁne Key Editor, Select Function4Deﬁning Keys Troubleshooting Maintenance and TroubleshootingCleaning your Video Terminal Symptom Possible Cause Suggested Solution Troubleshooting TableTable A-1 Identifying and Correcting Problems Accessibility aid Installing and Removing the ROM Cartridge Installing the ROM Cartridge Table A-1 Cont. Identifying and Correcting Problems IntroductionMaintenance and Troubleshooting Installing the ROM Cartridge Speciﬁcations System UnitKeyboard Operating TemperatureMonitor Requirements Electrical RequirementsOrder Number Country Amp Length Power CordsCommunication/Printer Ports EIAFigure B-1 Comm1-Serial Communication/Printer Ports Type Standard Subject Standards ConformanceTable B-1 Standards Conformance and Approvals Table B-1 Cont. Standards Conformance and Approvals A. Dhhs FDADisposing of your Terminal