IBM 1116 manual Updating printer hardware, LaserWriter 8 environment prior to LaserWriter

Page 108

Updating printer hardware

If you add or remove the paper tray 2 option, or if you load new paper sizes or types, each user should update his desktop printer object. Follow these steps to update the desktop printer object:

LaserWriter 8 environment (prior to LaserWriter 8.4.1):

1In the Chooser, select the printer to be updated.

2Click the Setup button.

3Click Auto Setup to automatically reconfigure the printer options. (Or, you can select Configure to manually reconfigure the printer options.)

LaserWriter 8 environment (LaserWriter 8.4.1 and later):

1Select the desktop printer object to be updated.

2Select the Printing menu, and then select Change Setup.

3Select Auto Setup to automatically reconfigure the printer options. (Or, you can manually reconfigure the printer options if you want.)

QuickDraw GX environment:

1Select the desktop printer object to be updated.

2Select the Printing menu, and then select Configuration.

3Select the options that match what is installed on the printer.

Troubleshooting

If you are having trouble with your print server on an AppleTalk network (EtherTalk, TokenTalk, or LocalTalk), do these steps in the order shown before you call the place where you bought your printer.

1Make sure the AppleTalk protocol is turned on (activated) in the print server. To find out, press the operator panel button to print a network setup page and look in the paragraph under AppleTalk.

2Make sure the status of the MarkNet print server is “connected”. To find out, look on the network setup page for Status.

3Do you see the printer in the Chooser?

–If no, restart the Macintosh workstation and look again.

–If yes, make sure the printer name in the Chooser exactly matches the AppleTalk name listed on the network setup page.

4Check all connections. Check the cables on the back of the Macintosh workstation. Check the cable between the printer and the workstation or network.

5If the job prints but the print quality is poor, refer to the printing tips provided on the drivers CD. These tips can save you a lot of time. To download the document to your workstation, launch the drivers CD, click Installer, select Documentation, and then click Install. Look in the Extras folder for the document titled Optimize Printer Output.

104

Argecy Computer Corporation 248-324-1800

Page 107 Page 109
Image 108
Page 107 Page 109
Contents User’s Reference Argecy Computer Corporation User’s Reference Argecy Computer Corporation Table of contents Loading labels Iii Argecy Computer Corporation Printer overview About your printerUse this feature When you want to Using the operator panel Operator panel has 6 lights and 1 operator panel buttonArgecy Computer Corporation Canceling a print job From the printer operator panelFrom a Windows computer From a Macintosh computerSetting up a print job Printing from a Windows environmentArgecy Computer Corporation Printing from a Macintosh computer Choosing the right print media Media Size Weight Capacity Media types and sizesPrinter media sources Argecy Computer Corporation Loading paper TrayArgecy Computer Corporation Manual feed Argecy Computer Corporation Optional tray Corner bucklers Argecy Computer Corporation Loading transparencies Argecy Computer Corporation Manual feed Argecy Computer Corporation Loading envelopes Manual feed Argecy Computer Corporation Loading labels Argecy Computer Corporation Manual feed Argecy Computer Corporation Loading card stock Manual feed Argecy Computer Corporation Printing on both sides of the paper Short Edge means the pages are bound along the short edge Conserving supplies Replacing the print cartridge Removing the old print cartridgeInstalling the new print cartridge Fuser Clearing jams Remove the print cartridge it may be warm Argecy Computer Corporation Argecy Computer Corporation Reinstall the tray and resume printing Understandinglightsthe operator panel Argecy Computer Corporation Secondary error code Toner low Argecy Computer Corporation What this light sequence means Argecy Computer Corporation Argecy Computer Corporation Printer is flushing corrupted print data Argecy Computer Corporation Argecy Computer Corporation Print the other side of your duplex print job Argecy Computer Corporation Argecy Computer Corporation Printer flash memory is full Argecy Computer Corporation Printer memory is full Printer has received a page that is too complex to print Toner is low and the toner alarm is set to on Argecy Computer Corporation Argecy Computer Corporation Printer has a service error and printing has stopped Solving print quality problems Problem What to doCartridge Printer or the computer Loading Paper From the special function menu, select Hex Trace mode to Resetting user defaults Using the special function menuRestoring factory defaults Enter the special function menuUsing Hex Trace mode Using print quality test pages Advanced troubleshooting modeAdvanced troubleshooting Argecy Computer Corporation Factory default Argecy Computer Corporation Default Argecy Computer Corporation USB NPA Mode is set to Auto, the factory default Auto CRLF/LFCR is set to Off, the factory default Setting up the network printer Connect the hardware Print a network setupEnvironments we support Configure and print Print Server TCP/IP Setup UtilitySet the IP address, netmask and gateway RequirementsTroubleshooting InstallationStatic ARP entry and telnet Set up to print Print to a queue on a Windows NT serverSet up IP printing on Windows NT 4.0/2000 Part 1 Install printer drivers and TCP/IP network supportPart 2 Create a Network Port Set up IP printing on Windows 95/98/Me Part 2 Create a Network Port Install a shared printer on a Windows NT 4.0/2000 server Part 1 Installing printer drivers and TCP/IP network supportPart 2 Creating a Network Port Part 3 Sharing the printer on the networkInstall a shared printer on network clients Setting up clients point and printSetting up clients peer-to-peer Novell NetWare Choosing NPRINTER/RPRINTER or Pserver Nprinter in IntraNetWare NDSAdvantages of using Pserver in NDS Disadvantage of using Pserver in NDSPserver in IntraNetWare NDS Rprinter vs. Pserver in NetWare Rprinter in NetWare Pserver in NetWare Finding the default AppleTalk name AppleTalkQueue-based printing Creating a desktop printer iconChanging the zone Changing the printer nameUpdating printer hardware LaserWriter 8 environment prior to LaserWriterLaserWriter 8 environment LaserWriter 8.4.1 and later QuickDraw GX environmentPrint server light patterns Normal conditionsError conditions Edition notice TrademarksSafety information Electronic emission notices Industry Canada compliance statementGerman acoustics statement Avis de conformité aux normes d’Industrie CanadaEuropean Community EC directives conformity Japanese Vcci notice United Kingdom Telecommunications ActLaser notice Index Dhcp113 114 Argecy Computer Corporation Part Number 53P9570
Top Page Image Contents