Fujitsu 500 Inserting or removing a CD, Inserting a CD, Removing the CD, Press the Eject button

Inserting or removing a CD

Inserting a CD

1Press the Eject button.

Pressing the center of the eject button opens the CD tray.

Eject button

Busy lamp

2 With the label facing left, place a CD in the center of the tray.

Label side

Tray

￿Point

•On some CD-ROM drives, when the PC is installed in a vertical position, you must extend stop- pers to prevent the CD from falling.

3Press the Eject button.

The tray slides into the drive to load the CD.

￿Point

•The Busy lamp lights up when the CD is loaded. Wait until the lamp goes off, then proceed to the next operation.

Removing the CD

Confirm that the Busy lamp is off, then press the Eject button to remove the CD.

28