Fujitsu 500 user manual Connect the power cable

Page 61

10Connect the power cable.

Connect a power cable to the connector on the installed internal option.

11Reinstall the reinforcement bracket.

12Reinstall the upper cover.

When necessary, remove the blank panel of the 3.5-inch front access bay from the back of the upper cover as shown by the arrow in the figure.

Do not remove the blank panel when installing a hard disk drive.

Stopper Press down to remove

Point

•For removal, use the installation procedure in the reverse order.

•After installing a hard disk drive or magneto-optical disk drive, take the following steps to con- figure the disk drive.

-Windows Me/98/95 models

When you have installed a hard disk drive, from MS-DOS prompt on the Start menu, use the FDISK command to configure sectors. Then, format the additional hard disk from My Com- puter.

-Windows 2000 models

When you have installed a hard disk drive, configure sectors and format the disk by using Administrate the Disk. Administrate the Disk is under the Storage Area displayed by clicking the [Start] button, [Program], then [Administrate the Computer].

-Windows NT models

When you have installed a hard disc drive, configure sectors and format the disk by using Disk Administrator. Disk Administrator is activated by clicking the [Start] button, [Program], then [Administration tools].

•Keep the removed brackets.

50

Image 61

Contents Deskpower 5000 Series User’s Manual Important Safety Instructions Iii Before Starting Your PC Safety product applicationsFor Safe Operations Point Conventions used in this manualCD-ROM drive¥setup.exe Sample screens Command entry from keyboardDiskcopy a a IllustrationsRear surface of the equipment DeskpowerIntroduction Manual configurationIntroduction ContentChapter Hardware Specifications Chapter Front of the PC unit Part Names and FunctionsPower switch Power lampHard disk access lamp Floppy disk drive access lampRear of the PC unit Parallel connector Keyboard connector Connect the keyboard Serial connectorCRT connector DVI connectorInside the PC unit Power supply unit Inch front access bayInternal hard disk drive Internal battery Primary IDE connector IDE1Dimm slots Keyboard Ctrl control key Caps Lock/Alphanumeric keyWindows key Alt keyUsing the mouse buttons Using the mouseMouse Moving the mousePointing Double-clickingDragging Installation area InstallationVertical placement Using two feetMount the feet on the PC unit Using one footMount the disassembled foot on the PC unit Disassemble the feet Horizontal placementPlace the PC unit on the disassembled feet Vertical placement Example of installationHorizontal placement Connection Connect the power cable to the display Connect the power cable to the outletConnect the mouse Connect the display cable to the PC unit Connect the keyboardConnect the LAN cable Connect the LAN cable to the networkConnecting the power cable Page Turning On the Power Press the power switch on the display Turning on the powerPress the power switch on the PC Turning off the power Turning Off the Power SupplyWindows Me Windows Windows 98/95Windows NT Restarting the PC RestartingPoint CD-ROM Inserting a CD Inserting or removing a CDRemoving the CD Press the Eject buttonInserting or removing a floppy disk Point Floppy DiskInserting a floppy disk Removing the floppy disk Confirm that the Floppy disk access lamp is offHardware Before Installing a Peripheral Device Page Removing the upper cover Removing the CoverRemove the upper cover Removing the reinforcement bracket Installing Memory Modules Location of memory modules Memory module installation procedureApplicable memory modules Memory module combinations Installing Memory ModulesInsert a memory module into the slot Installing an Expansion Card Applicable expansion cards Location of expansion cardsRemove the slot cover Installing an Expansion CardInsert the expansion card into the slot Install the mounting bracketPlug the PC Turn on the PC Windows Me/98/95/2000 models Windows NT modelsLocation of internal options Installing an Internal OptionPage Installing a device in the 3.5-inch front access bay Installing an Internal Hard Disk DriveMake a setting on the option to be installed Installing Other Internal OptionsInstall the internal option on the PC unit Master Slave Connect the flat cableConnect the power cable Troubleshooting Problems Data cannot be read from the CD-ROM drive Characters entered using the keyboard are not displayedMouse cursor does not move Windows Me/98/95Technical Information Maintenance of the PC unit Maintenance of the HardwareMaintenance of the keyboard Cleaning CDsCleaning the floppy disk drive Maintenance of the mousePreventing Television or Radio Interference Additional CautionsUSB Windows Me/98/95/2000 models Addition of a LAN card USB keyboard Windows 98 modelsWakeup On LAN Digital display outputConnecting the display Power-saving function of displayVideo memory capacity display Replacing the displayInternational EnergyStar Program Power-saving functionMouse with a scrolling function scrolling wheel Intel processor serial numberPC unit specifications Hardware SpecificationsProduct name CSMA/CD LAN adapter specificationsGraphical specifications Sound specificationsConnector specifications TXC+ LAN connector 100BASE-TX/10BASE-T Mouse connector Keyboard connector CD-ROM drive IndexMouse Clicking