Fujitsu M3096EX/GX manual Buttons and liquid crystal display screen

Page 14

2.4.1 Indicators

The meaning of each indicator is as follows:

Power indicator (Green):

Lights to indicate the power is on.

Read indicator (Green) :

In manual mode, when this lamp is lit, it indicates that the start switch is enabled.

Check (device check) indicator (Yellow):

Lights if a device error occurs which may result in a service call. This indicator blinks if a document is jammed in the automatic document feeder. This indicator turns off when the jammed documents are removed from the feeder and the feeder is closed.

2.4.2 Buttons and liquid crystal display screen

The function of each button is as follows:

Start button:

Read operation can be started in either manual or automatic mode. To start reading in manual mode, press this button while the ready indicator is lit.

• Manual mode: Reading is started by the start button.

• Automatic mode: Reading is started by a command from

the host system.

Stop button:

This button is effective regardless of whether the scanner is in manual or automatic mode. Press this button to stop the read operation. When this button is pressed, the image scanner operates as follows:

• Reading in flatbed mode: Reading is immediately stopped.

• Reading in ADF mode: Reading is immediately stopped

and documents being fed are ejected to the stacker. After cleaning a jam, press the stop button to clear the “Paper Jam” message displayed on the screen. The ready screen will then be displayed to indicate that the scanner is ready to read.

2 – 5

Image 14
Contents Image Scanner OPERATOR’S Guide Revision Record Conventions Contents Maintenance Figures Tables Preface Differences between the M3096EX and the M3096GXThis page is intentionally left blank Components Checking the ComponentsPart Names and Functions Exterior view of image scannerFunctions of each part Indication Panel Functions standard model Operator Panel Functions LCD modelButtons and liquid crystal display screen F a Liquid crystal display screenAutomatic document feeder ADF button Size buttonResolution button Density buttonLandscape button Halftone buttonMode 1 and 2 button Document buttonMessages Error messages temporary errors P e r E m p t yError messages device errors Operation status messagesInstallation and Connections Precautions× × Removing the Carrier Fixing BracketConnections Page Mounting the Stacker SCSI-ID Setting SCSI-ID settingTurning on the Power OperationsReading a Document in Flatbed Mode Reading a standard-size documentFlatbed reading Reading a page from a thick bookReading a document larger than the document board Removing the document coverReading Documents in ADF Mode Section a enlargerd ADF paper chute setting Top For portrait mode Or less Loading the document This page is intentionally left blank Maintenance Removing Jammed DocumentsCleaning Cleaning the ADF Replacing pad ASY Consumables/Periodical replacement partsParts number and replacement cycle Pick Roller replacement Replacing pick rollerMove the Retaining spring Chapter Troubleshooting Check itemsADF Appendix a Installation SpecificationsTable A.1 Installation specifications External Dimensions Figure A.1 External dimensionsTest mode for maintenance Appendix BTable B.1 LED at an error Option IPC-2/CMP-2 option board installationAppendix C Flat cable Flat cable connector Italy Reader Comment Form