(c)Pinch the retaining spring and slide it toward the roller. Free bearing A from the bracket by sliding it toward the roller.
Bearing A
Retaining spring
(d)Slide the pick roller shaft in the direction of arrow B and remove the shaft from bearing B. The roller shaft can then be lifted and removed as shown in Figure 5.7.
Figure 5.5 Move the Retaining spring
A
B
Bearing A
Figure 5.6 Slide the Pick Roller
(e)Remove the bearing B.
(f)Mount the new pick roller in reverse order of removal.
Bearing B
Figure 5.7 Remove the Pick Roller
NOTICE: When mounting the Guide A, note that the hooks of the retaining spring are not pressed by the Guide A. (See figure bellow)
Guide A
Retaining spring
5 – 6