IBM SENG-3002-01 manual Yes No

Page 9

Figure 1. Location of Access Cover

__ 1. Do you have a 270 system unit?

Yes No

You have a 820 system unit. Go to step 5 on page 4.

__ 2. Does your system unit have an access cover as shown in Figure 1

?

Yes No

The memory is located on the inside of your 270 system unit. Go to “Installing memory cards inside your system unit” on page 7.

__ 3. Remove the access cover.

Note: A customer can safely use all latches that are colored blue.

__ 4. Figure 2 on page 4 shows the location of the 2884 card assembly in a 270 system unit.

Installation Instructions

3

Image 9
Contents 30xx Memory Card Installation Page 30xx Memory Card Installation Second Edition May Laser Safety Information Safety and Environmental NoticesBattery Return Program Product Recycling and DisposalEnvironmental Design Before you begin Installation InstructionsIdentifying the memory location Powering off the system unitYes No ↓ Go to on Remove the empty card assembly Location of Card Assembly 2884 in 820 Unit Adding memory to the card assemblyMemory Locations on Card Assembly Install Memory Cards Installing memory cards inside your system unitMemory Connectors View Memory Connectors View No Yes Installing system unit covers270 Completing the installationFollowing screen is an example of what you should see Installation Instructions 14 30xx Memory Card Installation V5R1 820 System Units Unit CoversUnit in a rack Control panel without Electronic Keystick System unit control panelControl panel with Electronic Keystick Copyright IBM Corp IBM-CALL TrademarksHow satisfied are you that the information in this book is Readers’ Comments We’d Like to Hear from YouBusiness Reply Mail Page SENG-3002-01