Hubbell 580 manual Connecting a Macintosh desktop computer

Page 15

Setting up the LitePro 580

Connecting a Macintosh desktop computer

1.Attach one Mac adapter to the VGA connector and one Mac adapter to the MONITOR connector of the VGA cable.

2.Plug the LCD connector on the VGA cable into the projector’s Computer port.

3.Unplug the monitor cable from the computer’s monitor port.

4.Plug the monitor cable that you just removed into the MONITOR connector (with the Mac adapter) on the VGA cable.

5.Plug the VGA connector (with the Mac adapter) on the VGA cable into the computer’s graphics port.

6.Tighten the thumb screws on all the connectors to ensure proper grounding.

7.Turn on the projector, monitor, and computer.

Mac Adapter

VGA Cable

Mac Adapter

LitePro 580 User’s Guide

11

Image 15

Contents Contents Index MaintenanceTroubleshooting AppendixDo not look into the lens Safety summaryPower source Power cordHot surfaces GroundingFuse LampIntroduction 10a 10b 10c Unpacking the projectorLitePro 580-Front and rear view Fan intake grill Lamp cover Elevator feet CompatibilityUsage guidelines Cables and adaptersIf you need assistance Getting started Setting up the LiteProConnections to the projector Positioning the projectorConnecting a computer Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting video equipment Connecting audio/video equipment Connecting an external sound system Connecting the remote control by cable Powering up and adjusting the LitePro Setting up the LitePro Turning off the LitePro Projector control panel Using the LiteProDisplay Mode Controls Menu Mode Controls Basic functionsRemote control Display mode controls Menu mode controls Using the menus Reference to menu functions Video menu functions Display menu functions Audio menu functions Options menu functions Custom menu functions Connecting your computer Using LP UtilitiesInstalling the LP Utilities software LP-Link Utility Using the control icons Adjusting the Computer settings Using the adjustment control panelsAdjusting the Video settings Adjusting the Audio settings Adjusting the Display settings Adjusting the Options settings Blank Adjusting the Custom settingsLP Remote Programmer Utility Programmable buttonsLP Remote Programmer dialog box Programming a button Macros and templatesMlbc Activating and verifying the template Cleaning the lens MaintenanceCleaning the remote control Cleaning the fan intake filter Replacing the projection lamp Maintenance Replacing batteries in the remote control Replacing the fuse Maintenance Before you call for assistance TroubleshootingProblem Image is not centered on the screen Common problems and solutionsProblem Projector doesn’t turn on Problem Nothing on screenProblem No sound Problem Poor colorProblem Only the test pattern is displayed Problem No image on the computer screenProblem Image is noisy or streaked with horizontal lines Problem Fuzzy vertical bars in imageProblem Image and menus are reversed left to right Problem LitePro displays vertical lines, bleeding or spotsMonitor lights Lamp monitor Color Explanation Appendix Compatibility and cablingAbout broadcast video About computer video Specifications LCD Connector Pin assignmentsVGA Cable Monitor and VGA Connectors Order information AST Laptop display activation chartNCR FN-F5 Ntsc PAL 61 Secam IndexIndex Index Index Index Limited Warranty Part Number