Hubbell 580 manual Display mode controls

Using the LitePro 580

Display mode controls

When your computer or video equipment is projecting an image, your projector is in display mode. The buttons on the projector or the remote control provide basic control of how the image is displayed. A summary of these controls follows:

Lite Pro 580 basic display mode functions

Button on	Button on
projector	remote	Function
Standby	Standby	Turns projector lamp on and off.
Sync + -	Sync + -	Adjusts flickering or blurred image.
		Synchronizes the projector to the
		computer input signal.
Bright + -	Bright + -	Adjusts the brightness of the image.
Freeze	Freeze	Freezes the image. To cancel, press any
		button.
Video	Video	Selects video equipment as the source of
		the signal to be projected. By default, the
		projector is set to computer input.
		Pressing the button again returns to
		computer input.
Mute	Mute	Shuts off the audio. To cancel, press the
		Mute button again or adjust Volume.
Volume + -	Volume + -	Adjusts the volume.
	Light	Illuminates buttons on the remote for 10
		seconds. Press any button while the
		buttons are lit to extend the time for 10
		seconds.
	Custom	Carries out a function you have assigned
		with the Custom Key menu. (See
		“Custom menu functions” on page 31.)

LitePro 580 User’s Guide 23