Figure 4: Destination Directory window
Please note:
•The Destination Directory window is displayed only if a version of CIM agent is not already installed. Otherwise, the CIM agent is reinstalled or upgraded to the same install location.
•If the program detects insufficient space for the CIM agent installation in the chosen destination, an error message is displayed. You can free some space on the destination drive and then click Next or you can stop the installation program by clicking Cancel. You can also click Back, and choose another destination directory for the product.
7.The Updating CIMOM Port window opens. Click Next to accept the default port. If the default port is the same as another port already in use, modify the default port and click Next. Use the following command to check which ports are in use:
netstat -a
Either accept HTTPS as the communication protocol or select another protocol.
Exchange 2003 VSS Backup Solution | Page 16 | David West, David Hartman |
For IBM Storage DS8000/DS6000 |
| ©Copyright IBM Corp. 2007 |
And Symantec Backup Exec 11d |
|
|