C:\Program Files\IBM\cimagent
b.Type the following command at the command prompt to start the setuser interactive session to identify users to the CIMOM:
setuser
c.Type the following command in the setuser interactive session to define new users:
>>>adduser cimuser cimpass
where:
•cimuser represents the new user name that can access the CIM agent CIMOM
•cimpass represents the password for the new user name that can access the CIM agent CIMOM
The following is example output:
An entry for user cimuser successfully added where cimuser is the new user name.
7.Repeat step 6c for each additional user name that you want to configure.
8.You can change the default password for “superuser” by starting the setuser command and by providing a user name and password. Issue the setuser interactive session command to change the password for the superuser:
>>>chuser superuser newpasswd
where newpasswd is the new password for the superuser.
You can also delete the superuser by issuing the following setuser interactive session command:
>>>rmuser superuser
9.Close the setuser interactive session by typing exit.
Note: Unlike the setdevice actions, you are not required to stop and restart the CIMOM to make the setuser actions take effect.
If you were able to perform all of the configuration tasks successfully, the CIM agent has been successfully installed and configured on your Windows system.
Exchange 2003 VSS Backup Solution | Page 23 | David West, David Hartman |
For IBM Storage DS8000/DS6000 |
| ©Copyright IBM Corp. 2007 |
And Symantec Backup Exec 11d |
|
|