IBM DS6000, DS8000 manual Error Codes Returned by Microsoft VSS and VDS, Wwpn

ibmvcfg set	Specifies the WWPN that designates the freepool.
vssFreeInitiator	The default value is 5000000000000000. Modify this
<WWPN>	value only if there is a host already in your
	environment with a WWPN of 5000000000000000.
ibmvcfg set	Specifies the WWPN that designates the
vssReservedInitiator	reservedpool. The default value is
<WWPN>	5000000000000001. Modify this value only if there is
	a host already in your environment with a WWPN of
	5000000000000001.
ibmvcfg set	Sets the FlashCopy version that is available on the
FlashCopyVer <1 2>	storage unit. The default value is 1.
	Virtual Disk Service settings
None

Error Codes Returned by Microsoft VSS and VDS

ibmvcfg set vssFreeInitiator 5000000000000000

ibmvcfg set vssFreeInitiator 5000000000000001

ibmvcfg set FlashCopyVer

The following table lists Microsoft Volume Shadow Copy and Virtual Disk Services error codes.

Note: These errors are logged in the Windows Event Monitor and in the Microsoft Volume Shadow Copy and Virtual Disk Services log file that is located in the directory chosen during installation.

	Symbolic Name		Code	Definition
	ERR_JVM		1000	JVM Creation failed.
	ERR_CLASS_NOT_FOUND		1001	Class not found: %1.
	ERR_MISSING_PARAMS		1002	Some required parameters are
				missing.
	ERR_METHOD_NOT_FOUND		1003	Method not found: %1.
				A missing parameter is required. Use
	ERR_REQUIRED_PARAM		1004	the configuration utility to set this
				parameter: %1.
	ERR_RECOVERY_FILE_CREATION_FAILED		1600	The recovery file was not created.
Exchange 2003 VSS Backup Solution		Page 45		David West, David Hartman
For IBM Storage DS8000/DS6000				©Copyright IBM Corp. 2007

And Symantec Backup Exec 11d