IBM DS6000, DS8000 manual Verifying the CIM Agent Connection on Windows

Page 25

Verifying the CIM Agent Connection on Windows

During this task, the CIM agent software connects to the storage unit that you identified in the configuration task.

If you are managing an ESS, perform the following steps to verify that the configuration file for the ESS CLI (CLI.CFG) is set correctly and that you have a connection. If you are not managing an ESS, skip to step 4 to verify that you have a connection.

1.Verify that you have network connectivity to the ESS from the system where the CIM agent is installed. To do this, perform the following steps:

a.Open a command prompt window.

b.Issue a ping command to the ESS; for example:

ping 9.11.111.111

where 9.11.111.111 is the ESS IP address

c.Check that you can see reply statistics from the ESS IP address. The following is example output:

Pinging 9.11.111.111 with 32 bytes of data:

Reply from 9.11.111.111: bytes=32 time<10ms TTL=255

Reply from 9.11.111.111: bytes=32 time<10ms TTL=255

Reply from 9.11.111.111: bytes=32 time<10ms TTL=255

Reply from 9.11.111.111: bytes=32 time<10ms TTL=255

If you see other messages that indicate that the request has timed out, see your Network Administrator for help on establishing network connectivity from the system where the CIM agent is installed.

2.Verify that the ESS CLI is operational and can connect to the storage unit. To do this, perform the following steps:

a.Open a command prompt window.

b.Issue the following command:

esscli -uessuser -pesspass -s9.11.111.111 list server

Exchange 2003 VSS Backup Solution

Page 25

David West, David Hartman

For IBM Storage DS8000/DS6000

 

©Copyright IBM Corp. 2007

And Symantec Backup Exec 11d

 

 

Image 25
Contents Configuration and Best Practices Table of Contents Exchange Backup and Restore Disclaimer Executive Summary Importance of Exchange VSS SolutionsTarget Environment Cost of DowntimeIBM System Storage DS8000 Series IBM System Storage DS6000 Series Page Installing CIM Agent for Windows Installation Overview for Windows Installing the CIM Agent on Windows Launchpad Window Product Installation Check window IBM ESS CLI window Netstat -a Update Cimom Port window Verifying the CIM Agent Installation on Windows Close the Administrative Tools window Steps Configuring the CIM Agent for WindowsProvider entry for IP 9.11.111.111 successfully added Page \Program Files\IBM\cimagent Configuring the CIM Agent to run in Unsecure Mode Esscli -uessuser -pesspass -s9.11.111.111 list server Verifying the CIM Agent Connection on WindowsESS CLI Service wbemhttp//tpc035/ 5989 Press any key to continue Error Type 1. E CMMOM0002E Cimerraccessdenied Error MessagesCimom No CIM agent running or registered with SLP on current host DS Open API Support for Microsoft VSS and VDS Overview Microsoft Volume Shadow Copy ServiceMicrosoft Virtual Disk Service Following minimum hardware is required Hardware RequirementsSoftware Requirements License Agreement Edit Data window Password window Setup Type window Choose Destination Location window Ready to Install the Program window VSS Creating Vssfree and Vssreserved Pools for MicrosoftWwname Username ResultCimomHost server Wwpn Error Codes Returned by Microsoft VSS and VDSErrarelunssupportedibmgetluninfo Erressservicefreecontroller Validate VSS Operations with Vshadow.exe Backup Exec Overview Installing Symantec Backup Exec for Windows ServersBackup Exec Installation Overview Page Operating system Backup Exec Installation RequirementsInternet browser Additional application supportProcessor MemoryStorage hardware Backup Exec Service AccountInstalling Backup Exec for Windows Servers Page Page Before Starting Backup Exec Initial Backup Exec Server Configuration Installing the Remote Agent for Windows Systems Overview of the Backup Exec Agent for Exchange Exchange Backup and RestoreInformation for Microsoft Exchange Cluster Environments Performing Exchange VSS Backups Granular Recovery Technology BenefitsSet the Default VSS Options Set Application Defaults window Select Microsoft Volume Shadow Copy ServiceClick New Backup Job Configure the Backup JobExchange Exchange 2003 with Service Pack 1 or laterMedia server Exchange Off-Host VSS BackupsExchange Server Media server and the Exchange ServerConfiguring an Offhost backup Set Application Defaults window Best Practices for Using Offhost Backup Restoring from an Exchange VSS BackupClick New Restore Job Restrictions when Restoring from Snapshot Backups Recovering Mailbox Data with Granular Restore TechnologyRecovering mailbox data Consistency Checks on Exchange Database and Log Files Best Practices for Exchange Storage and VSS BackupsMinimizing application impact ConclusionAppendix HBA ConfigurationLogical Configurations Storage Subsystem ConfigurationSoftware Configuration Switch ConfigurationExchange 2003 Configuration Backup Client Software ConfigurationVDS/VSS Provider Configuration Backup Server ConfigurationDS8000 Dscli Configuration IBM DS CIM Icat Configuration
Related manuals
Manual 374 pages 22.96 Kb Manual 450 pages 61.48 Kb