Perform the following steps using the IBM DS Storage Manager or DSCLI to create the VSS_FREE and VSS_RESERVED pools:
Note: If you are using the DSCLI you must perform these steps in order.
1.Create a volume group with the name ″VSS_FREE″ or another name, of the same type as your Windows Server 2003 host, for example: SCSI Map 256.
2.Create a virtual hostconnect on the storage unit named ″VSS_FREE″ or another name, with the following parameters:
a.
b.
c.
d.-wwname 5000000000000000
3.Create a volume group with the name ″VSS_RESERVED″ or another name, of the same type as your Windows Server 2003 host, e.g. SCSI Map 256.
4.Create a virtual hostconnect on the storage unit named
″VSS_RESERVED″ or another name, with the following parameters:
a.
b.
c.
d.
5.Create and assign free volumes to the VSS_FREE volume group.
Note: If you already have volumes that are created for the VSS_FREE virtual host, you must assign those volumes to VSS_FREE.
Verifying DS Open API Support for Microsoft VSS and VDS Windows Configuration
This task verifies that Microsoft Volume Shadow Copy and Virtual Disk Services are configured correctly on your Windows system.
After you have created the VSS_FREE and VSS_RESERVED pools for Microsoft Volume Shadow Copy Service, perform the following steps to verify your configuration:
Exchange 2003 VSS Backup Solution | Page 42 | David West, David Hartman |
For IBM Storage DS8000/DS6000 |
| ©Copyright IBM Corp. 2007 |
And Symantec Backup Exec 11d |
|
|