IBM ATA-3 manual Drive, Preparing, Completing the Installation, 2-11, Next

Page 67

Check your configuration-setup information for one of the following:

If the configuration-setup program reports the size of your new drive as what you expected, save your changes, close the configuration program, and go to “Using Your Operating System for Partitioning” on page 2-12.

If your computer seems to lock up, hang, or does not restart successfully, go to “Correcting Hardware Problems” on

page 2-14.

If all	power	cables	are in	use, purchase	a dc	Y-connector	Preparing	the	Drive	for	Use
(available at		many	electronic	stores) and	split	a connection to	Preparing	the	Drive	for	Use
provide	power	for more	devices.

Step 7. Completing the Installation

To complete the hardware section of the drive installation:

Attention:	Partitioning	a hard	disk	drive	or	installing	Disk
Manager	on the drive	erases	all	user	data	on the	drive.

1.

Verify

that

the

hard

disk

drive

is

securely

mounted

and

the cables

Determining

What

To

Do

Next

are

firmly

attached.

When

you

restart

your

computer,

the

configuration-setup

information

2.

Verify

that

the

cables

do

not

interfere

with

the

computer

cover

screen

displays

because

you

changed

the

hardware

in

your

computer.

and

do

not

block

the

power-supply

fan

blades or

air-flow

paths.

Some

computers

require

you

to

make

configuration

choices

the

first

3.

Reinstall

the

computer

cover.

time

you

restart

after

installing

a

new

device. If

the

screen does not

display, see your computer documentation

for

information

about

how

4.

Reconnect

all

devices.

Make

sure that

the

keyboard,

mouse,

and

to

access

it.

For

most

IBM

computers,

you

can

see

the

configuration

monitor

are

firmly

connected.

information

during

computer

startup

by

pressing

F1

when

the

5.

Reconnect

all

ac

power

cords.

configuration

graphic

displays in

the

upper

right

corner

of

your screen.

If the configuration-setup program reports your new drive

capacity as very much less than what you expected, go to

Part 2: Installation Guide

2-11

Image 67

Contents by IBM Deskstar Enhanced IDE ATA-3 Hard Disk DriveUsers Guide OPTIONS1997 FirstPart ContentsPart 2 Installation Guide Installation GuideB. Help Partiv Deskstar Hard Disk Drive User’s Guide page SafetyRead First DO NOTPart ThisAbout BookGuide InstallationPart QuickMaster Step 3. Setting the Configuration Jumpers1-2 Deskstar Hard Disk Drive User’s Guide Step 6. Closing the Computer Step 4. Installing the Drive in the Drive BayStep 5. Connecting the Drive and the Cables Part 1 Quick Installation GuideEnter Next1-4 Deskstar Hard Disk Drive User’s Guide System 1-6 Deskstar Hard Disk Drive User’s Guide LimitationsDetect TypeEasy Partitioning and Formatting Using Disk ManagerDisk 1-8 Deskstar Hard Disk Drive User’s Guide InstallationGerman QuickPart 1 Quick Installation Guide 1-10 Deskstar Hard Disk Drive User’s Guide Enter 1-12 Deskstar Hard Disk Drive User’s Guide Systemless Type 1-14 Deskstar Hard Disk Drive User’s Guide French 1-16 Deskstar Hard Disk Drive User’s Guide Step 6. Closing the Computer 1-18 Deskstar Hard Disk Drive User’s Guide System 1-20 Deskstar Hard Disk Drive User’s Guide Part 1 Quick Installation Guide Spanish 1-22 Deskstar Hard Disk Drive User’s GuidePart 1 Quick Installation Guide 1-24 Deskstar Hard Disk Drive User’s Guide Enter 1-26 Deskstar Hard Disk Drive User’s Guide Type 1-28 Deskstar Hard Disk Drive User’s Guide Japanese 1-30 Deskstar Hard Disk Drive User’s Guide Step 6. Closing the Computer 1-32 Deskstar Hard Disk Drive User’s Guide System 1-34 Deskstar Hard Disk Drive User’s Guide Part 1 Quick Installation Guide 1-36 Deskstar Hard Disk Drive User’s Guide ItalianPart 1 Quick Installation Guide 1-38 Deskstar Hard Disk Drive User’s Guide Enter 1-40 Deskstar Hard Disk Drive User’s Guide Type 1-42 Deskstar Hard Disk Drive User’s Guide Portuguese Brazilian1-44 Deskstar Hard Disk Drive User’s Guide Step 6. Closing the Computer 1-46 Deskstar Hard Disk Drive User’s Guide System 1-48 Deskstar Hard Disk Drive User’s Guide Part 1 Quick Installation Guide 1-50 Deskstar Hard Disk Drive User’s Guide Product DescriptionInstallation IDE bus Installation RequirementsBefore BeginConfiguration toolsDrive Size2-4 Deskstar Hard Disk Drive User’s Guide means SizeFAT-16 OnlineOS/2 Backup ConsiderationsDiskette Creatingthe most Installing the DriveHandling Precautions YourOpen 2-8 Deskstar Hard Disk Drive User’s GuideWhat NextStep Step 5. Mounting the Drive in the Bay2-10 Deskstar Hard Disk Drive User’s Guide Step 6. Attaching the Cables to the Drive2-11 Step 7. Completing the InstallationDrive PreparingPartitioning UsingInstalling SystemDisk InstallingWindows x is2-14 Deskstar Hard Disk Drive User’s Guide usingDrive PrimaryLimitations 2-15Enter Correcting2-16 Deskstar Hard Disk Drive User’s Guide UsingDisk Manager2-17 Booting From a DisketteUpdate Filetype filecopy DiagnosticsFileCopy Utilities2-19 SolvingProblem 2-20 Deskstar Hard Disk Drive User’s Guide To Disconnect Appendix A Safety InformationPart 3 Appendixes DO NOT print this page-replace with National Safety Information 3-2 Deskstar Hard Disk Drive User’s GuidePart 3 Appendixes 3-4 Deskstar Hard Disk Drive User’s Guide Part 3 Appendixes 3-6 Deskstar Hard Disk Drive User’s Guide To ConnectPart 3 Appendixes 3-8 Deskstar Hard Disk Drive User’s Guide Part 3 Appendixes 3-10 Deskstar Hard Disk Drive User’s Guide Call ServiceAppendix B Information3-12 Deskstar Hard Disk Drive User’s Guide Computer and BIOS ManufacturersAddress Manufacturers3-13 Telephone3-14 Deskstar Hard Disk Drive User’s Guide Appendix C NoticesNotices Trademarks