
Connecting the Multi-Burner  using configuration 2
To connect the 
Figure 1-2.  Configuration 2: USB standard bus power configuration
1.Turn on your computer.
| 2. | Using the USB cable | , insert the cable plug | into the USB connector of | |
| 
 | the drive while squeezing the two buttons on the connector. | |||
| 3. | Plug the standard USB connector | into the USB port of your computer. | ||
| 4. | Using the USB cable | , insert the cable plug | into the DC IN connector of | |
| 
 | the drive. | 
 | 
 | 
 | 
| 5. | Plug the standard USB connector | into the USB port of your computer. | ||
Chapter 1.