Power/Busy indicator | The green LED indicates the power status and the operation |
| states of the drive. |
| v LED is on: when the drive is connected in any of the |
| supported power configurations and the USB port of your |
| computer. |
| v LED is on: during data write |
| v LED blinks: during data read |
| v LED is off: when the drive is not connected to the USB port |
Write indicator | The amber LED indicates the write state of the drive. |
| v LED blinks: during data write |
| v LED is off: when data write is not in operation |
Eject button | Press this button to open the top cover. |
| Attention: An electrical locking mechanism is used in this |
| drive so that an erroneous operation does not open the top |
| cover during write. Make sure that the power is on and the |
| drive is not in operation before pressing the eject button to |
| open the top cover. |
| If the top cover cannot be opened even when the eject button |
| is pressed or if the top cover needs to be opened when power |
| is not supplied from the AC adapter, use the emergency eject |
| lever at the bottom of the drive. |
| Check that nothing is placed on the top cover when ejecting. |
| When normal ejection is impossible, an error message may |
| appear on your computer. When ejection is not performed |
| normally, open the top cover manually and close it securely |
| after removing anything that may be on the cover. |