IBM 22P9176 manual Preparing to use the Multi-Burner

Chapter 4. Preparing to use the Multi-Burner

Before using the Multi-Burner, follow the procedure below:

1.Make sure the Multi-Burner is properly connected to your ThinkPad computer.

2.Check the locations of the functions on the Multi-Burner (refer to the figures below).

3.Insert the IBM USB 2.0 Portable Multi-Burner Software and User’s Guide Super CD that was shipped with this option to install the CD-R/CD-RW/DVD writing software.

4.Double-click on the application you want and follow the instructions on the screen.

5.Check that the drive operates normally and keep the enclosed warranty in a safe place after filling it in.

Check that nothing is placed on the top cover when ejecting a CD or DVD. When normal ejection is impossible, an error message may appear on your computer. When ejection is not performed normally, open the top cover manually and close it securely after removing anything that may be on the cover.

Following are the locations of the functions on the Multi-Burner:

Top cover	The top cover must be closed to play a disc.
Disc tray	Set the media with the label face up on the disc tray.
USB connector	Insert the plug of the provided dedicated USB cable.
DC IN connector	Connect the provided AC adapter or cable assembly DC IN
	connectors. This drive can also be used under USB Power
	Only with certain limitations (refer to “Configuration 3:
	auxiliary USB power configuration” on page 1-6.)

© Copyright IBM Corp. 2003 4-1