IBM 09N4076 manual Tray Looks, Tray These Plastic Tabs

To load a CD into a vertically mounted CD-RW drive, follow these steps.

1. Press the Eject/Load button.

2. Look at the illustrations and compare them to your loading tray.

Ÿ

If

your

loading

tray

looks

like

the

left

illustration,

insert

the

CD

carefully so

that

the

edges of the

CD

are

underneath

the

tabs

on

the

loading

tray.

These

plastic

tabs

cover

the

edges

of

the CD

and

hold

it

in

place.

The

tabs

are

attached

to

the

tray

itself

and

cannot

be

moved.

Ÿ

If

your

loading

tray

looks

like

the

right

illustration,

insert

the

CD

into

the

tray,

and

gently

push

the

movable

tab

forward to

hold

the

CD

in

place.

3. Close

the

loading

tray

by

pressing

the

Eject/Load

button,

or

by

gently

pushing

the

tray

in.

Part 1: Installation and usage guide 1-27