IBM 09N4076 manual Icon, Does

7.

Restart

the

computer.

If

the device

icon

is

still

not

present,

check

cable

connections,

device

jumper

settings,

and

resolve

any

existing

conflicts.

You

cannot

access the CD-RW drive

(DOS

and

Windows

3.x),

or

the

drive

icon

(Windows

3.x)

does

not

display.

Your

CD-RW

drive

device

driver

might

not

be

loaded

or

cannot

be

found.

Before

checking

the

CONFIG.SYS

and

AUTOEXEC.BAT

files,

make

a

backup

copy

of

these

files

in

a

preferred

directory.

1.

At

the

DOS

prompt:

a.

Type

x:copy CONFIG.SYS CONFIG.IBM, where

x is the directory drive letter

and

press

Enter.

b.

Type x:copy AUTOEXEC.BAT AUTOEXEC.IBM, where

x is the directory drive

letter

and

press

Enter.

2.

Use

a

text

editor

such

as

E

or

Edit.

At

the

DOS

prompt,E

type(or your

editor

name)

CONFIG.SYS

and

press

Enter.

3.

Insert

the

following

line

at

the

top

of the CONFIG.SYS

file

to

allow

for

more

than five drive letters, if needed. lastdrive=z

4.Check for the following device driver line.

DEVICEHIGH=C:\IBMIDECD.SYS /D:IBMCD1ðð

If this line is not present, add it.

5. Save the CONFIG.SYS file and exit.

6.Type E (or your editor name) AUTOEXEC.BAT and press Enter.

7. Check for the following device driver line.

LH C:\MSCDEX /D:IBMCD1ðð /M:1ð

If

this

line

is

not

present,

add

it.

8.

If

the

Windows

screen

automatically

opens

when

you

start

your

computer,

check

that

the

line

LH C:\MSCDEX /D:IBMCD1ðð /M:1ð

comes

before

the

line

that

starts

Windows

WIN(

).

If not, move

the

MSCDEX

statement

above

this

line

in

the

file.

9.

Save

the

AUTOEXEC.BAT

file

and

exit.

10. Make sure that the

device

drivers

are

on

the

hard

disk

and

are

displayed in the

correct

directory,

as

shown.

C:\IBMIDECD.SYS

C:\MSCDEX

2-8 IBM 4X/8X/32X CD-ReWritable Internal IDE Option Kit