Chapter 2. Using the CD-RW/DVD drive
This section provides information on how to handle, load, and care for DVDs and CDs and how to care for your
Before you begin
For best results, review the following guidelines before using the drive:
vDo not move your ThinkPad computer while formatting or writing a disc as this might cause data errors. Also, minimize typing while formatting or writing to a disc, as this might also cause data errors.
vKeep the ThinkPad computer on a flat surface when writing to a disc.
vMake sure the ThinkPad computer is plugged into an ac outlet when using the drive. The disc might be damaged if the battery runs out while writing to a disc.
vTurn screensavers off. Using a screensaver might interrupt the formatting and writing process.
vDo not put your ThinkPad computer into hibernation or suspend mode while writing to a disc.
Note: The read and write results of the drive depend upon the quality and characteristics of the DVD or CD media used.
Handling and caring for a disc
Carefully handle and clean discs, especially writable media types such as
vAlways store CD ROMs in their original packaging
vAlways store CD ROMs out of direct sunlight
vAlways store CD ROMs away from direct heat sources
vRemove CD ROMs from the computer when not in use
vCheck CD ROM for cracks BEFORE each use
vDO NOT force CD ROMs into the computer/packaging
vDO NOT bend or flex CD ROMs
IMPORTANT: DO NOT use CD ROMs that are cracked.
Attention: Wiping a disc using a circular motion can cause data loss.
© Copyright IBM Corp. 2003 | 3 |