Cisco Systems WS-X4516 specifications Configuring Your Supervisor Engine

Configuring Your Supervisor Engine

Figure 5 SC-Type Fiber-Optic Connector

Keys Plug

Cable Light out

of fiber

Light into	Receptacle
fiber
Receiver
Transmitter

Key slots

13087

Configuring Your Supervisor Engine

For information and commands to configure your supervisor engine, refer to the Software Configuration Guide for your switch.

GBIC Handling Guidelines and Installation

A GBIC (see Figure 6) is a hot swappable input/output device that plugs into the Gigabit Ethernet port of a supervisor engine and links the supervisor engine with a fiber-optic network. GBICs are online swappable.

Figure 6 Gigabit Interface Converter

11825

Receiver Transmitter

The following GBIC media types are supported:

•1000BASE-T (WS-G5483)

•1000BASE-SX (WS-G5484)

•1000BASE-LX/LH (WS-G5486)

•1000BASE-ZX (WS-G5487)

•CWDM (CWDM-GBIC-xxxx=, which codes 8 different wavelengths)

•DWDM (DWDM-GBIC-xx.xx=, which codes 32 different wavelengths)

Installation and Configuration Note for the Catalyst 4500 Series Supervisor Engine V

18 78-15590-02