Cisco Systems SFS 7000P, SFS 7000D manual Removing Power Supply Modules, Pull the unit from the bay

Page 52

Chapter 4 Installing Field Replaceable Units

Removing Power Supply Modules

Removing Power Supply Modules

Caution Do not remove the power supply module without first removing the screws. Use a number 1 Phillips or a slotted screwdriver.

To remove a power supply module, follow these steps:

Step 1 Make sure you have a number 1 Phillips or a slotted screwdriver to disengage the fasteners. Step 2 Ground yourself appropriately.

Caution Never place your hand inside an empty card or module bay or anywhere inside the

Cisco SFS 7000P and SFS 7000D Server Switches.

Step 3 Locate the power supply module that you want to remove.

If you have two power supply modules installed, you can remove one of them without removing power from the switch.

Step 4 Unscrew the fasteners that hold the power supply module in place. (See Figure 4-4.)

Figure 4-4 Removing the Screws from the Power Supply of the Switch

 

154010

Step 5

Pull the unit from the bay.

Step 6

Install the filler panel in place of the power supply module, or install a new power supply module. If you

 

are installing a new power supply module, see the “Installing a Power Supply Module” section on

 

page 4-2.

Caution Never operate the device without a filler panel or power supply module in place because the device might overheat.

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

4-4

OL-10853-01

 

 

Image 52
Contents Corporate Headquarters Text Part Number OL-10853-01Page N T E N T S IiiLatency Managing the Switch Chassis and Management Interface A-1 Preface AudienceOrganization Chapter Title DescriptionConvention Description ConventionsViii Bewaar Deze Instructies Warnung Wichtige SicherheitshinweiseAvvertenza Importanti Istruzioni Sulla Sicurezza Aviso Instruções Importantes DE SegurançaPage GEM Disse Anvisninger XiiXiii Related Documentation Obtaining DocumentationCisco.com XivYou can access international Cisco websites at this URL Documentation FeedbackCisco Product Security Overview Product Documentation DVD Ordering DocumentationProduct Alerts and Field Notices Reporting Security Problems in Cisco ProductsXvi Cisco Technical Support & Documentation Website Obtaining Technical AssistanceXvii Submitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information XviiiXix OL-10853-01 Introduction to Switches Product OverviewSwitch Connectors Switch ComponentsSystem Features Power Supply BayPower Supply Module LEDsScalability High AvailabilityAdministrative Features OL-10853-01 Safety Preparation for InstallationSite Requirements Humidity TemperatureAltitude Corrosion Dust and ParticlesElectromagnetic and Radio Frequency Interference Shock and Vibration Power Source InterruptionsPreventing Electrostatic Discharge Damage Power Requirements Air FlowSite Preparation Checklist Task No Planning Activity Verified By Time DateInstalling the Switches Pre-installation Instructions Rack-Mounting the Switches Rack-Mounting the SwitchPlace the switch on a secure, clean surface RequirementsInstalling the Switch with One Person Holding Bracket Inside of Rack Installing the Switch with Two People Obtaining an IP Address Configuring Basic ConnectivityFollowing sections appear in this section Obtaining a Static IP Address for Ethernet Management Enter the enable command Enter the configure command to enter the configuration modeSFS-7000Dconfig#interface mgmt-ethernet SFS-7000Dconfig#address-option staticConnecting the 10/100 Ethernet Management Port Powering Up the ChassisSave the configuration to preserve it between reboots SFS-7000D#copy running-config startup-configConnecting Network Devices Connecting InfiniBand Devices To connect InfiniBand devices, follow these steps13 InfiniBand Cable with Pinch Connector Connecting Ethernet Management Devices Managing the SystemInstalling the Switches Managing the System OL-10853-01 Installing Field Replaceable Units Power Supply ModulesLocating the Power Supply Unit Failed Power Supply ModulesInstalling a Power Supply Module Removing a Filler Panel from the SwitchRemoving the Power Supply from the Switch Removing Power Supply Modules Pull the unit from the bayManaging the Switch LEDsChassis Status LEDs Color IndicationBi-color chassis status LED InfiniBand Port LEDs Power Supply LEDs2describes the InfiniBand Port LED operation Power Supply and Fan LEDs Location Managing the System with Element ManagerUsing the Power Supplies Tab Using the Summary TabUsing the Fans Tab Using the Sensors Tab Displaying Power Supply InformationSFS-7000P#show power-supply Displaying System InformationDisplaying Fan Information Displaying Sensor InformationOL-10853-01 Hardware Diagnostic Tests About Diagnostic TestsLED Tests Self-TestsSFS-7000P#show diagnostic card Running Card Self-TestSFS-7000Pconfig#diag chassis test standard Running Chassis Self-TestRunning Fan Self-Test SFS-7000P-1#show diag postEnter the diag fan id command SFS-7000P#show diagnostic fanRunning Power Supply Tests Reboot the chassis when the self-test is completeDiag Fru-error Diag FanRunning a Self-Test on a Power Supply Running a LED Test on the Power SupplyStart the test Enable Displaying Hardware ErrorsMore sysloghwiflog Error Number Description Power supply DC fail errorPower supply fan fail error Power supply I2C communication errorOL-10853-01 Specification Specifications and Compliance CertificationsChassis and Management Interface Electrical Specifications Category SpecificationAcronyms and Abbreviations Acronym ExpansionAppendix B Acronyms and Abbreviations D E IN-5IN-6 Nonvolatile memory IN-7IN-8 IN-9 IN-10
Related manuals
Manual 7 pages 62.58 Kb

SFS 7000D, SFS 7000P specifications

Cisco Systems SFS 7000P is a high-performance storage area network (SAN) solution designed to address the demands of modern data centers. With the continuous growth of data and the increasing need for efficient and secure storage solutions, the SFS 7000P brings forth a blend of innovative technologies and features that facilitate enhanced performance, reliability, and scalability.

One of the main features of the SFS 7000P is its impressive throughput capabilities. The system is optimized for high-speed data processing, enabling organizations to handle large volumes of data efficiently. With support for a range of protocols, including Fibre Channel and Ethernet, the SFS 7000P provides flexibility for integration within diverse IT environments.

Scalability is another characteristic that sets the SFS 7000P apart. Organizations can start with a manageable configuration and expand their storage capabilities as their data needs grow. This modular architecture ensures that investments remain protected and can adapt efficiently to changing business requirements.

In terms of reliability, the SFS 7000P employs advanced redundancy and failover mechanisms. Redundant components within the system, combined with robust data protection software, minimize the risk of data loss and downtime. This is particularly crucial for enterprises that require 24/7 availability for critical applications.

The system supports a range of data management features, including snapshots, replication, and tiered storage. These capabilities provide organizations with the tools to optimize their storage usage, safeguard their data, and ensure seamless disaster recovery options, thereby enhancing overall data resilience.

Furthermore, Cisco has integrated its advanced security technologies into the SFS 7000P, ensuring that data is protected throughout its lifecycle. With stringent access controls and encrypted data transfer capabilities, organizations can secure sensitive information against unauthorized access.

Lastly, the user-friendly interface of the SFS 7000P allows for simple management and monitoring of storage resources. Administrators can efficiently oversee their infrastructure through an intuitive dashboard, enabling quicker responses to issues and better resource allocation.

In summary, Cisco Systems SFS 7000P provides a powerful combination of speed, scalability, reliability, and security. It is an ideal choice for organizations looking to enhance their storage capabilities while ensuring future-proofing against the ever-growing data landscape.