Power Requirements, Air Flow | Cisco Systems SFS 7000D, SFS 7000P

Chapter 2 Preparation for Installation

Power Requirements

Air Flow

Note The air flows from front to back through the Cisco SFS 7000P and SFS 7000D Server Switches. (See Figure 2-1.)

Figure 2-1 Air Flow Direction in the Cisco SFS 7000P and SFS 7000D Server Switches

Back

181224

Front

Follow these guidelines to ensure proper airflow:

•Maintain ambient airflow throughout the data center to ensure normal operation.

•If installing in an enclosed cabinet, ensure that the cabinet has adequate ventilation, and allow at least 2.5 inches (6.4 cm) of clearance between the chassis vents and the cabinet wall.

•If placing the switch adjacent to a device that exhausts air towards the switch, the horizontal distance between the devices should be a minimum of 6 inches (15.2 cm).

•Ensure that cables do not obstruct the airflow through the chassis.

•Consider heat dissipation of all equipment when determining the air-conditioning requirements, as specified in the hardware installation guide. When evaluating airflow requirements, consider that hot air generated by equipment at the bottom of the rack can be drawn into the intake ports of the equipment above.

Power Requirements

Follow these requirements when preparing your site for the switch installation:

•In systems configured with two power supplies, connect each of the two power supplies to a separate input power source. If you fail to do this, your system might be susceptible to total power failure due to a fault in the external wiring or a tripped circuit breaker.

•To prevent a loss of input power, be sure that the total maximum load on each source circuit is within the current ratings of the wiring and breakers.

•The AC power receptacles used to plug in the chassis must be the grounding type. The grounding conductors that connect to the receptacles should connect to protective earth ground at the service equipment.

Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide

	OL-10853-01	2-5

SFS 7000D, SFS 7000P specifications

Cisco Systems SFS 7000P is a high-performance storage area network (SAN) solution designed to address the demands of modern data centers. With the continuous growth of data and the increasing need for efficient and secure storage solutions, the SFS 7000P brings forth a blend of innovative technologies and features that facilitate enhanced performance, reliability, and scalability.

One of the main features of the SFS 7000P is its impressive throughput capabilities. The system is optimized for high-speed data processing, enabling organizations to handle large volumes of data efficiently. With support for a range of protocols, including Fibre Channel and Ethernet, the SFS 7000P provides flexibility for integration within diverse IT environments.

Scalability is another characteristic that sets the SFS 7000P apart. Organizations can start with a manageable configuration and expand their storage capabilities as their data needs grow. This modular architecture ensures that investments remain protected and can adapt efficiently to changing business requirements.

In terms of reliability, the SFS 7000P employs advanced redundancy and failover mechanisms. Redundant components within the system, combined with robust data protection software, minimize the risk of data loss and downtime. This is particularly crucial for enterprises that require 24/7 availability for critical applications.

The system supports a range of data management features, including snapshots, replication, and tiered storage. These capabilities provide organizations with the tools to optimize their storage usage, safeguard their data, and ensure seamless disaster recovery options, thereby enhancing overall data resilience.

Furthermore, Cisco has integrated its advanced security technologies into the SFS 7000P, ensuring that data is protected throughout its lifecycle. With stringent access controls and encrypted data transfer capabilities, organizations can secure sensitive information against unauthorized access.

Lastly, the user-friendly interface of the SFS 7000P allows for simple management and monitoring of storage resources. Administrators can efficiently oversee their infrastructure through an intuitive dashboard, enabling quicker responses to issues and better resource allocation.

In summary, Cisco Systems SFS 7000P provides a powerful combination of speed, scalability, reliability, and security. It is an ideal choice for organizations looking to enhance their storage capabilities while ensuring future-proofing against the ever-growing data landscape.