Cisco Systems 1503 Snmp Communities Commands, Show snmp communities, Hub show snmp communities

Management Configuration Commands

SNMP Communities Commands

Use the commands in this section to configure the SNMP community strings. These strings are used by the network management software to access the Micro Hub 1503.

show snmp communities

Syntax: show snmp communities

Mode: Administrator

Description: Displays information about all of the configured community strings. Following is example output from this command.

Hub> show snmp communities

Index Community Name Access Right Status

--------------------------------------------

1	public	read/write		enabled
2	private	read only		enabled
3		read	only	disabled
4		read	only	disabled

Command Display Definitions

•Index—Index number of the community string.

•Community Name—Name used for management access. Can be up to 20 alphanumeric characters.

•Access Right—Management access setting: either read/write or read only.

•Status—Community string status: either enabled or disabled.

Using Your Hub Software 3-31