Cisco Systems 15600 manual DLP-E152 Install Public-Key Security Certificate, 17-41

Page 41

Chapter 17 DLPs E100 to E199

DLP- E152 Install Public-Key Security Certificate

b.In the Set West Protection Operation dialog box, choose CLEAR from the drop-down list. Click OK.

c.In the Confirm BLSR Operation dialog box, click Yes.

Step 5 To clear a Force switch on the east line:

a.Right-click the BLSR east port where you want to clear the protection switch and choose Set East Protection Operation. Ports with a Force switch applied are marked with an F.

b.In the Set East Protection Operation dialog box, choose CLEAR from the drop-down list. Click OK.

c.In the Confirm BLSR Operation dialog box, click Yes.

On the BLSR network graphic, a green and a purple span line connects each node. This is normal for BLSRs when protection operations are not invoked.

Step 6 From the File menu, choose Close.

Step 7 Return to your originating procedure (NTP).

DLP-E152 Install Public-Key Security Certificate

Purpose

This task installs the ITU Recommendation X.509 public-key security

 

certificate. The pubic-key certificate is required to run Software Release 1.1

 

or later.

Tools/Equipment

None

Prerequisite Procedures

This task is performed during the “DLP-E26 Log into CTC” task on

 

page 16-33. You cannot perform it outside of this task.

Required/As Needed

Required

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Step 1 If the Java Plug-in Security Warning dialog box appears, choose one of the following options:

•Yes (Grant This Session)—Installs the public-key certificate to your PC only for the current session. After the session is ended, the certificate is deleted. This dialog box will appear the next time you log into the ONS 15327.

•No (Deny)—Denies permission to install certificate. If you choose this option, you cannot log into the ONS 15327.

•Always (Grant Always)—Installs the public-key certificate and does not delete it after the session is over. Cisco recommends this option.

•More Details (View Certificate)—Allows you to view the public-key security certificate.

Step 2 If the Login dialog box appears, continue with Step 3. If the Change Java Policy File dialog box appears, complete this step. The Change Java Policy File dialog box appears if CTC finds a modified Java policy file (.java.policy) on your PC. In Software Release 1.0, the Java policy file was modified to allow CTC software files to be downloaded to your PC. The modified Java policy file is not needed in Software R1.1 and later, so you can remove it unless you will log into ONS 15600s running Software R1.0. Choose one of the following options:

Cisco ONS 15600 Procedure Guide, R8.0

17-41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents 17-1 17-2 DLP-E101 Apply a Lock On in a 1+1 Group17-3 DLP-E102 Apply a Lockout in a 1+1 Group17-4 17-5 DLP-E105 Create a DCC TunnelNetwork view, click the Provisioning Overhead Circuits tabs 17-6 DLP-E106 Clean Fiber Connectors17-7 DLP-E107 Clean the Fiber Adapters17-8 DLP-E108 Verify that a 1+1 Working Port is Active17-9 Bolt Hole Pattern 17-1017-11 DLP-E110 Assign a Name to a Port17-12 17-13 17-14 DLP-E114 Provision Section DCC Terminations17-15 17-16 DLP-E115 Change the Service State for a PortClick the Provisioning Line tabs 17-17 DLP-E116 Remap the K3 ByteDLP-E119 Set Auto-Refresh Interval for Displayed PM Counts 17-18 DLP-E120 Remove the Narrow CRMs17-19 17-20 DLP-E122 Manual Switch the Node Timing Reference17-21 DLP-E123 Clear a Manual Switch on a Node Timing ReferenceDLP-E125 Provision the Iiop Listener Port on the ONS DLP-E124 Set the Optical Power Received Nominal ValueClick the Provisioning Sonet Thresholds tabs 17-2217-23 17-24 DLP-E127 Edit Path Protection Circuit Path Selectors17-25 17-26 DLP-E129 Enable Dialog Box Do-Not-Display OptionDLP-E130 Change Security Policy on a Single Node 17-27 DLP-E131 Change Security Policy on Multiple Nodes17-28 17-29 DLP-E135 Log Out a User on a Single Node Click the Provisioning Security Active Logins tabsDLP-E136 Log Out a User on Multiple Nodes 17-3017-31 DLP-E137 Check the Network for Alarms and Conditions17-32 17-33 DLP-E142 Install the Narrow CRMs17-34 DLP-E143 Install the Wide CRMsCRM Screw Holes Front 17-3517-36 17-37 DLP-E145 Connect the PDU Ground Cables to the PDU17-38 Power Terminal Block Right Side Shown17-39 DLP-E146 Install Isolated Logic Ground17-40 DLP-E150 Clear a Blsr Force Ring SwitchClick the Provisioning Blsr tabs 17-41 DLP-E152 Install Public-Key Security CertificateCTC Preferences Dialog Box 17-4217-43 DLP-E154 Delete Alarm Severity Profiles17-44 DLP-E155 Enable Alarm FilteringConditions Window Filter Dialog Box 17-4517-46 DLP-E156 Modify Alarm and Condition Filtering Parameters17-47 DLP-E157 Disable Alarm FilteringDLP-E158 Manually Lock or Unlock a User on a Single Node 17-48 DLP-E159 Manually Lock or Unlock a User on Multiple NodesClick the Provisioning Security Users tabs DLP-E160 Verify Blsr Extension Byte Mapping DLP-E161 Single Shelf Control Card Switch TestClick the Provisioning Line tab 17-4917-50 17-51 DLP-E163 Delete Circuits17-52 Click the Maintenance Protection tabsDLP-E165 Change an OC-N Card 17-53 17-54 DLP-E169 Initiate a Lockout on a Path Protection PathLockout of Protection 17-55 DLP-E171 Verify Fan OperationClick the Circuits Circuits tabs ONS 15600 Shelf with One Fan Tray and Air Filter Removed 17-5617-57 17-58 DLP-E178 Delete Overhead Circuits DLP-E177 Change Tunnel TypeClick the Provisioning Overhead Circuits tabs 17-5917-60 DLP-E179 Repair an IP Tunnel17-61 J1 Function CardsSelecting the Edit Path Trace Option 17-6217-63 17-64 DLP-E181 Provision Path Trace on OC-N PortsClick Circuits Click the Login Node Group tab DLP-E182 Create Login Node GroupsClick Create Group 17-6517-66 Tools17-67 DLP-E185 Change the JRE Version17-68 DLP-E186 Remove Pass-through Connections17-69 DLP-E187 Delete a Node from a Specified Login Node GroupDLP-E188 Change a Circuit Service State 17-70 DLP-E189 Provision Line DCC Terminations17-71 Node view, click the Provisioning Comm Channels Ldcc tabs17-72 DLP-E190 Provision a Proxy TunnelClick the Provisioning Network Proxy subtabs 17-73 DLP-E191 Provision a Firewall TunnelClick the Provisioning Network Firewall subtabs 17-74 DLP-E192 Delete a Proxy TunnelDLP-E193 Delete a Firewall Tunnel DLP-E197 Change a Line DCC Termination DLP-E196 Change a Section DCC TerminationClick the Provisioning Comm Channels Sdcc tabs 17-75DLP-E199 Delete a Line DCC Termination DLP-E198 Delete a Section DCC TerminationClick the Provisioning Comm Channel Sdcc tabs 17-7617-77 17-78

15600 specifications

Cisco Systems 15600 is a powerful network router designed to meet the growing demands of enterprise and service provider networks. Equipped with advanced features and cutting-edge technology, the 15600 caters to a range of applications, from data centers to branch offices, supporting the evolving landscape of cloud computing and Internet of Things (IoT).

One of the standout features of the Cisco 15600 is its scalability. The router is built to handle increasing bandwidth requirements, making it ideal for environments where traffic is expected to grow. It supports a range of interface modules, allowing organizations to tailor their network connectivity according to their specific needs. This modular design not only ensures flexibility but also future-proofs the investment, as additional capacity can be added as network demands increase.

Cisco’s 15600 also incorporates advanced security features, such as built-in firewalls and support for secure VPN connections. This is crucial for businesses that prioritize data protection and need to safeguard their information against cyber threats. The router also supports multiple encryption protocols, allowing organizations to implement robust security measures without sacrificing performance.

With regard to performance, the 15600 offers high throughput rates, which are essential for handling large volumes of traffic efficiently. This enhanced performance is further supported by Cisco's innovative technologies, such as Application-Specific Integrated Circuits (ASICs) that optimize data processing. Additionally, the router utilizes Cisco’s Intelligent WAN (iWAN) capabilities, which enhance the overall performance and efficiency of WAN connections.

Another key characteristic of the 15600 is its support for software-defined networking (SDN). This enables organizations to automate network management, reduce operational costs, and improve agility in deploying applications. Using Cisco's software solutions, network administrators can manage the router through a centralized interface, simplifying operations and enhancing visibility into network performance.

Furthermore, the Cisco 15600 is designed with energy efficiency in mind. Its architecture minimizes power consumption while maintaining high performance levels, contributing to sustainability goals and reducing operational costs over time.

Overall, the Cisco Systems 15600 router stands out as a robust networking solution, offering unmatched scalability, security, performance, and operational efficiency. As organizations increasingly turn to cloud-based solutions and IoT devices, the capabilities of the 15600 position it as a critical component in modern network infrastructures.
Top Page Image Contents