Cisco Systems 15600 manual 17-63

Page 63

Chapter 17 DLPs E100 to E199

DLP- E180 Provision Path Trace on Circuit Source and Destination Ports

c.Click the Disable AIS and RDI if TIM-P is detected check box if you want to suppress the alarm indication signal (AIS) and remote defect indication (RDI) when the STS Path Trace Identifier Mismatch Path (TIM-P) alarm appears. Refer to the Cisco ONS 15600 Troubleshooting Guide for descriptions of alarms and conditions.

d.(Check box visibility depends on card selection.) Click the Disable AIS on C2 Mis-Matchcheck box if you want to suppress the AIS when a C2 mismatch occurs.

e.Click Apply, then click Close.

Note It is not necessary to set the format (16 or 64 bytes) for the circuit destination expected string; the path trace process automatically determines the format.

Step 9 Provision the circuit source expected string:

a.In the Edit Circuit window (with Show Detailed Map chosen; see Figure 17-9 on page 17-62) right-click the circuit source port and choose Edit Path Trace from the shortcut menu.

b.In the Circuit Path Trace window, enable the path trace expected string by choosing Auto or Manual from the Path Trace Mode drop-down list:

•Auto—Uses the first string received from the port at the other path trace end as the baseline string. An alarm is raised when a string that differs from the baseline is received.

•Manual—Uses the Current Expected String field as the baseline string. An alarm is raised when a string that differs from the Current Expected String is received.

c.If you set the Path Trace Mode field to Manual, enter the string that the circuit source should receive from the circuit destination in the New Expected String field. If you set Path Trace Mode to Auto, skip this step.

d.Click the Disable AIS and RDI if TIM-P is detected check box if you want to suppress the AIS and RDI when the TIM-P alarm appears. Refer to the Cisco ONS 15600 Troubleshooting Guide for descriptions of alarms and conditions.

e.(Check box visibility depends on card selection.) Click the Disable AIS on C2 Mis-Matchcheck box if you want to suppress the AIS when a C2 mismatch occurs.

f.Click Apply.

Note It is not necessary to set the format (16 or 64 bytes) for the circuit source expected string; the path trace process automatically determines the format.

Step 10 After you set up the path trace, the received string appears in the Received field on the path trace setup window. The following options are available:

•Click Hex Mode to display path trace in hexadecimal format. The button name changes to ASCII Mode. Click it to return the path trace to ASCII format.

•Click the Reset button to reread values from the port.

•Click Default to return to the path trace default settings (Path Trace Mode is set to Off and the New Transmit and New Expected Strings are null).

Caution Clicking Default will generate alarms if the port on the other end is provisioned with a different string.

Cisco ONS 15600 Procedure Guide, R8.0

17-63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents 17-1 17-2 DLP-E101 Apply a Lock On in a 1+1 Group17-3 DLP-E102 Apply a Lockout in a 1+1 Group17-4 DLP-E105 Create a DCC Tunnel Network view, click the Provisioning Overhead Circuits tabs17-5 17-6 DLP-E106 Clean Fiber Connectors17-7 DLP-E107 Clean the Fiber Adapters17-8 DLP-E108 Verify that a 1+1 Working Port is Active17-9 Bolt Hole Pattern 17-1017-11 DLP-E110 Assign a Name to a Port17-12 17-13 17-14 DLP-E114 Provision Section DCC Terminations17-15 DLP-E115 Change the Service State for a Port Click the Provisioning Line tabs17-16 DLP-E116 Remap the K3 Byte DLP-E119 Set Auto-Refresh Interval for Displayed PM Counts17-17 17-18 DLP-E120 Remove the Narrow CRMs17-19 17-20 DLP-E122 Manual Switch the Node Timing Reference17-21 DLP-E123 Clear a Manual Switch on a Node Timing Reference17-22 DLP-E124 Set the Optical Power Received Nominal ValueDLP-E125 Provision the Iiop Listener Port on the ONS Click the Provisioning Sonet Thresholds tabs17-23 17-24 DLP-E127 Edit Path Protection Circuit Path Selectors17-25 DLP-E129 Enable Dialog Box Do-Not-Display Option DLP-E130 Change Security Policy on a Single Node17-26 17-27 DLP-E131 Change Security Policy on Multiple Nodes17-28 17-29 17-30 Click the Provisioning Security Active Logins tabsDLP-E135 Log Out a User on a Single Node DLP-E136 Log Out a User on Multiple Nodes17-31 DLP-E137 Check the Network for Alarms and Conditions17-32 17-33 DLP-E142 Install the Narrow CRMs17-34 DLP-E143 Install the Wide CRMsCRM Screw Holes Front 17-3517-36 17-37 DLP-E145 Connect the PDU Ground Cables to the PDU17-38 Power Terminal Block Right Side Shown17-39 DLP-E146 Install Isolated Logic GroundDLP-E150 Clear a Blsr Force Ring Switch Click the Provisioning Blsr tabs17-40 17-41 DLP-E152 Install Public-Key Security CertificateCTC Preferences Dialog Box 17-4217-43 DLP-E154 Delete Alarm Severity Profiles17-44 DLP-E155 Enable Alarm FilteringConditions Window Filter Dialog Box 17-4517-46 DLP-E156 Modify Alarm and Condition Filtering ParametersDLP-E157 Disable Alarm Filtering DLP-E158 Manually Lock or Unlock a User on a Single Node17-47 DLP-E159 Manually Lock or Unlock a User on Multiple Nodes Click the Provisioning Security Users tabs17-48 17-49 DLP-E161 Single Shelf Control Card Switch TestDLP-E160 Verify Blsr Extension Byte Mapping Click the Provisioning Line tab17-50 17-51 DLP-E163 Delete CircuitsClick the Maintenance Protection tabs DLP-E165 Change an OC-N Card17-52 17-53 DLP-E169 Initiate a Lockout on a Path Protection Path Lockout of Protection17-54 DLP-E171 Verify Fan Operation Click the Circuits Circuits tabs17-55 ONS 15600 Shelf with One Fan Tray and Air Filter Removed 17-5617-57 17-58 17-59 DLP-E177 Change Tunnel TypeDLP-E178 Delete Overhead Circuits Click the Provisioning Overhead Circuits tabs17-60 DLP-E179 Repair an IP Tunnel17-61 J1 Function CardsSelecting the Edit Path Trace Option 17-6217-63 DLP-E181 Provision Path Trace on OC-N Ports Click Circuits17-64 17-65 DLP-E182 Create Login Node GroupsClick the Login Node Group tab Click Create Group17-66 Tools17-67 DLP-E185 Change the JRE Version17-68 DLP-E186 Remove Pass-through ConnectionsDLP-E187 Delete a Node from a Specified Login Node Group DLP-E188 Change a Circuit Service State17-69 17-70 DLP-E189 Provision Line DCC Terminations17-71 Node view, click the Provisioning Comm Channels Ldcc tabsDLP-E190 Provision a Proxy Tunnel Click the Provisioning Network Proxy subtabs17-72 DLP-E191 Provision a Firewall Tunnel Click the Provisioning Network Firewall subtabs17-73 DLP-E192 Delete a Proxy Tunnel DLP-E193 Delete a Firewall Tunnel17-74 17-75 DLP-E196 Change a Section DCC TerminationDLP-E197 Change a Line DCC Termination Click the Provisioning Comm Channels Sdcc tabs17-76 DLP-E198 Delete a Section DCC TerminationDLP-E199 Delete a Line DCC Termination Click the Provisioning Comm Channel Sdcc tabs17-77 17-78

15600 specifications

Cisco Systems 15600 is a powerful network router designed to meet the growing demands of enterprise and service provider networks. Equipped with advanced features and cutting-edge technology, the 15600 caters to a range of applications, from data centers to branch offices, supporting the evolving landscape of cloud computing and Internet of Things (IoT).

One of the standout features of the Cisco 15600 is its scalability. The router is built to handle increasing bandwidth requirements, making it ideal for environments where traffic is expected to grow. It supports a range of interface modules, allowing organizations to tailor their network connectivity according to their specific needs. This modular design not only ensures flexibility but also future-proofs the investment, as additional capacity can be added as network demands increase.

Cisco’s 15600 also incorporates advanced security features, such as built-in firewalls and support for secure VPN connections. This is crucial for businesses that prioritize data protection and need to safeguard their information against cyber threats. The router also supports multiple encryption protocols, allowing organizations to implement robust security measures without sacrificing performance.

With regard to performance, the 15600 offers high throughput rates, which are essential for handling large volumes of traffic efficiently. This enhanced performance is further supported by Cisco's innovative technologies, such as Application-Specific Integrated Circuits (ASICs) that optimize data processing. Additionally, the router utilizes Cisco’s Intelligent WAN (iWAN) capabilities, which enhance the overall performance and efficiency of WAN connections.

Another key characteristic of the 15600 is its support for software-defined networking (SDN). This enables organizations to automate network management, reduce operational costs, and improve agility in deploying applications. Using Cisco's software solutions, network administrators can manage the router through a centralized interface, simplifying operations and enhancing visibility into network performance.

Furthermore, the Cisco 15600 is designed with energy efficiency in mind. Its architecture minimizes power consumption while maintaining high performance levels, contributing to sustainability goals and reducing operational costs over time.

Overall, the Cisco Systems 15600 router stands out as a robust networking solution, offering unmatched scalability, security, performance, and operational efficiency. As organizations increasingly turn to cloud-based solutions and IoT devices, the capabilities of the 15600 position it as a critical component in modern network infrastructures.
Top Page Image Contents