Cisco Systems 15600 manual DLP-E181 Provision Path Trace on OC-N Ports, Click Circuits, 17-64

Page 64

Chapter 17 DLPs E100 to E199

DLP- E181 Provision Path Trace on OC-N Ports

The expect and receive strings are updated every few seconds if the Path Trace Mode field is set to Auto or Manual.

Step 11 Click Close.

The detailed circuit window indicates path trace with an M (manual path trace) or an A (automatic path trace) at the circuit source and destination ports.

Step 12 Return to your originating procedure (NTP).

DLP-E181 Provision Path Trace on OC-N Ports

Purpose

This task monitors a path trace on OC-N ports within the circuit path.

Tools/Equipment

The OC-N ports you want to monitor must be on OC-N cards capable of

 

receiving path trace. See Table 17-1 on page 17-61.

Prerequisite Procedures

DLP-E180 Provision Path Trace on Circuit Source and Destination Ports,

 

page 17-61

 

DLP-E26 Log into CTC, page 16-33

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Step 1 From the View menu, choose Go to Other Node. In the Select Node dialog box, choose the node where path trace was provisioned on the circuit source and destination ports.

Step 2 Click Circuits.

Step 3 Choose the STS circuit that has path trace provisioned on the source and destination ports, then click Edit.

Step 4 In the Edit Circuit window, click the Show Detailed Map check box at the bottom of the window. A detailed circuit graphic showing source and destination ports appears.

Step 5 In the detailed circuit map right-click the circuit OC-N port (the square on the left or right of the source node icon) and choose Edit Path Trace from the shortcut menu.

Note The OC-N port must be on a receive-only card listed in Table 17-1 on page 17-61. If not, the Edit Path Trace menu item will not appear.

Step 6 In the Circuit Path Trace window, enable the path trace expected string by choosing Auto or Manual from the Path Trace Mode drop-down list:

•Auto—Uses the first string received from the port at the other path trace end as the current expected string. An alarm is raised when a string that differs from the baseline is received. For OC-N ports, Auto is recommended because Manual mode requires you to trace the circuit on the Edit Circuit window to determine whether the port is the source or destination path.

•Manual—Uses the Current Expected String field as the baseline string. An alarm is raised when a string that differs from the Current Expected String is received.

Cisco ONS 15600 Procedure Guide, R8.0

17-64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents 17-1 DLP-E101 Apply a Lock On in a 1+1 Group 17-2DLP-E102 Apply a Lockout in a 1+1 Group 17-317-4 Network view, click the Provisioning Overhead Circuits tabs DLP-E105 Create a DCC Tunnel17-5 DLP-E106 Clean Fiber Connectors 17-6DLP-E107 Clean the Fiber Adapters 17-7DLP-E108 Verify that a 1+1 Working Port is Active 17-817-9 17-10 Bolt Hole PatternDLP-E110 Assign a Name to a Port 17-1117-12 17-13 DLP-E114 Provision Section DCC Terminations 17-1417-15 Click the Provisioning Line tabs DLP-E115 Change the Service State for a Port17-16 DLP-E119 Set Auto-Refresh Interval for Displayed PM Counts DLP-E116 Remap the K3 Byte17-17 DLP-E120 Remove the Narrow CRMs 17-1817-19 DLP-E122 Manual Switch the Node Timing Reference 17-20DLP-E123 Clear a Manual Switch on a Node Timing Reference 17-21DLP-E124 Set the Optical Power Received Nominal Value DLP-E125 Provision the Iiop Listener Port on the ONSClick the Provisioning Sonet Thresholds tabs 17-2217-23 DLP-E127 Edit Path Protection Circuit Path Selectors 17-2417-25 DLP-E130 Change Security Policy on a Single Node DLP-E129 Enable Dialog Box Do-Not-Display Option17-26 DLP-E131 Change Security Policy on Multiple Nodes 17-2717-28 17-29 Click the Provisioning Security Active Logins tabs DLP-E135 Log Out a User on a Single NodeDLP-E136 Log Out a User on Multiple Nodes 17-30DLP-E137 Check the Network for Alarms and Conditions 17-3117-32 DLP-E142 Install the Narrow CRMs 17-33DLP-E143 Install the Wide CRMs 17-3417-35 CRM Screw Holes Front17-36 DLP-E145 Connect the PDU Ground Cables to the PDU 17-37Power Terminal Block Right Side Shown 17-38DLP-E146 Install Isolated Logic Ground 17-39Click the Provisioning Blsr tabs DLP-E150 Clear a Blsr Force Ring Switch17-40 DLP-E152 Install Public-Key Security Certificate 17-4117-42 CTC Preferences Dialog BoxDLP-E154 Delete Alarm Severity Profiles 17-43DLP-E155 Enable Alarm Filtering 17-4417-45 Conditions Window Filter Dialog BoxDLP-E156 Modify Alarm and Condition Filtering Parameters 17-46DLP-E158 Manually Lock or Unlock a User on a Single Node DLP-E157 Disable Alarm Filtering17-47 Click the Provisioning Security Users tabs DLP-E159 Manually Lock or Unlock a User on Multiple Nodes17-48 DLP-E161 Single Shelf Control Card Switch Test DLP-E160 Verify Blsr Extension Byte MappingClick the Provisioning Line tab 17-4917-50 DLP-E163 Delete Circuits 17-51DLP-E165 Change an OC-N Card Click the Maintenance Protection tabs17-52 17-53 Lockout of Protection DLP-E169 Initiate a Lockout on a Path Protection Path17-54 Click the Circuits Circuits tabs DLP-E171 Verify Fan Operation17-55 17-56 ONS 15600 Shelf with One Fan Tray and Air Filter Removed17-57 17-58 DLP-E177 Change Tunnel Type DLP-E178 Delete Overhead CircuitsClick the Provisioning Overhead Circuits tabs 17-59DLP-E179 Repair an IP Tunnel 17-60J1 Function Cards 17-6117-62 Selecting the Edit Path Trace Option17-63 Click Circuits DLP-E181 Provision Path Trace on OC-N Ports17-64 DLP-E182 Create Login Node Groups Click the Login Node Group tabClick Create Group 17-65Tools 17-66DLP-E185 Change the JRE Version 17-67DLP-E186 Remove Pass-through Connections 17-68DLP-E188 Change a Circuit Service State DLP-E187 Delete a Node from a Specified Login Node Group17-69 DLP-E189 Provision Line DCC Terminations 17-70Node view, click the Provisioning Comm Channels Ldcc tabs 17-71Click the Provisioning Network Proxy subtabs DLP-E190 Provision a Proxy Tunnel17-72 Click the Provisioning Network Firewall subtabs DLP-E191 Provision a Firewall Tunnel17-73 DLP-E193 Delete a Firewall Tunnel DLP-E192 Delete a Proxy Tunnel17-74 DLP-E196 Change a Section DCC Termination DLP-E197 Change a Line DCC TerminationClick the Provisioning Comm Channels Sdcc tabs 17-75DLP-E198 Delete a Section DCC Termination DLP-E199 Delete a Line DCC TerminationClick the Provisioning Comm Channel Sdcc tabs 17-7617-77 17-78

15600 specifications

Cisco Systems 15600 is a powerful network router designed to meet the growing demands of enterprise and service provider networks. Equipped with advanced features and cutting-edge technology, the 15600 caters to a range of applications, from data centers to branch offices, supporting the evolving landscape of cloud computing and Internet of Things (IoT).

One of the standout features of the Cisco 15600 is its scalability. The router is built to handle increasing bandwidth requirements, making it ideal for environments where traffic is expected to grow. It supports a range of interface modules, allowing organizations to tailor their network connectivity according to their specific needs. This modular design not only ensures flexibility but also future-proofs the investment, as additional capacity can be added as network demands increase.

Cisco’s 15600 also incorporates advanced security features, such as built-in firewalls and support for secure VPN connections. This is crucial for businesses that prioritize data protection and need to safeguard their information against cyber threats. The router also supports multiple encryption protocols, allowing organizations to implement robust security measures without sacrificing performance.

With regard to performance, the 15600 offers high throughput rates, which are essential for handling large volumes of traffic efficiently. This enhanced performance is further supported by Cisco's innovative technologies, such as Application-Specific Integrated Circuits (ASICs) that optimize data processing. Additionally, the router utilizes Cisco’s Intelligent WAN (iWAN) capabilities, which enhance the overall performance and efficiency of WAN connections.

Another key characteristic of the 15600 is its support for software-defined networking (SDN). This enables organizations to automate network management, reduce operational costs, and improve agility in deploying applications. Using Cisco's software solutions, network administrators can manage the router through a centralized interface, simplifying operations and enhancing visibility into network performance.

Furthermore, the Cisco 15600 is designed with energy efficiency in mind. Its architecture minimizes power consumption while maintaining high performance levels, contributing to sustainability goals and reducing operational costs over time.

Overall, the Cisco Systems 15600 router stands out as a robust networking solution, offering unmatched scalability, security, performance, and operational efficiency. As organizations increasingly turn to cloud-based solutions and IoT devices, the capabilities of the 15600 position it as a critical component in modern network infrastructures.
Top Page Image Contents