Installing Adapters in the
Removing the Cover
Warning | Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. | |
| Statement 1 |
|
|
| |
| To remove the cover, follow these steps: | |
|
| |
Step 1 | Review the information in the “Safety Guidelines” section on page 5. | |
Step 2 | Power down the appliance and all attached devices. Disconnect the power cord and all external cables. | |
Step 3 | Loosen the two captive screws (labeled 1 in Figure 3) on the rear of the cover. | |
| Figure 3 | Removing the Cover |
|
| 1 |
115802
Step 4 Slide the cover back, and then lift it up and off the appliance.
Caution For proper cooling and airflow, replace the cover before turning on the appliance. Operating the appliance for extended periods (over 30 minutes) with the cover removed might damage appliance components.
Installing the Cisco WAE Inline Network Adapter
8 |
| |
|