Cisco Systems manual Contents, Cisco uBR10-LCP2-MC28C Overview

Page 2

Contents

Contents

•Purpose, page 1

•Audience, page 1

•Scope, page 1

•Contents, page 2

•Cisco uBR10-LCP2-MC28C Overview, page 2

•Technical Specifications, page 7

•Safety Information and Warnings, page 8

•Installing a Cisco uBR10-LCP2-MC28C Cable Interface Line Card, page 12

•Replacing the Cisco uBR-MC28C Line Card in the Cisco uBR10-LCP2 Adapter Card, page 18

•Troubleshooting the Cisco uBR10-LCP2-MC28C Cable Interface Line Card, page 23

•Related Documentation, page 24

•Obtaining Documentation, page 24

•Obtaining Technical Assistance, page 25

Cisco uBR10-LCP2-MC28C Overview

The Cisco uBR10-LCP2-MC28C cable interface line card is a combination of two components:

•Cisco uBR-MC28C—Provides two downstream and eight upstream ports, divided into two domains.

•Cisco Line Card Processor (Cisco uBR10-LCP2) adapter card—Provides the mechanical and electrical conversions necessary for the Cisco uBR-MC28C cable interface line card to fit the form factor used in the Cisco uBR10012 chassis.

Note All installation information about the LCP adapter card also applies to the LCP2 adapter card.

Note You must be using revision 07 of the LCP adapter card or any version of the LCP-2 card to support N+1 requirements when the card is used as a redundant or protect card. See the Proactive Upgrade Field Notice number 18301 at the following URL:

http://www-tac.cisco.com/Support_Library/field_alerts/fn18103.html.

The Cisco uBR10-LCP2 adapter card and Cisco uBR-MC28C cable interface line card are mechanically connected to each other using brackets and power connectors. The two cards are inserted into and removed as a single logical and physical unit.

The Cisco uBR10-LCP2 adapts the Cisco uBR-MC28C cable interface line card to the form factor of the Cisco uBR10012 chassis and provides:

•Proper voltage conversion for the card and chassis

•Boot code required to use the Cisco uBR-MC28C cable interface line card

•SDRAM for buffering packets as they are transferred between the card and PRE1 (or PRE)

Cisco uBR10-LCP2-MC28C Cable Interface Line Card for the Cisco uBR10012 Router

2

OL-4653-01

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Scope PurposeAudience Contents Cisco uBR10-LCP2-MC28C OverviewQPSK, 16 QAM Cisco uBR10012 Router Chassis Slot Numbering Physical Description MC28CLED Technical Specifications Description SpecificationsPreventing Electrostatic Discharge Damage Safety Information and WarningsElectrical Equipment Guidelines Statement 1071-Warning Definition Bewaar Deze InstructiesBewahren SIE Diese Hinweise GUT AUF Spara Dessa Anvisningar Removing a Cable Interface Line Card from the Chassis Tools and Parts RequiredUnpacking and Preparing Captive screws Opening the Ejector Levers Make sure that you are using the ESD-preventive wrist strap Inserting the Cable Interface Line Card Closing the Ejector Levers Connecting the Cables Removing the Nuts and Washers 62668 58721 Connecting the Cables Page World Wide Web Related DocumentationObtaining Documentation Ordering Documentation Obtaining Technical AssistanceDocumentation CD-ROM Documentation FeedbackCisco.com Technical Assistance CenterCisco TAC Escalation Center Obtaining Technical Assistance
Top Page Image Contents