Cisco Systems manual Installing the Cisco Unified Videoconferencing 3545 MCU

Page 1

C H A P T E R 2

Installing the Cisco Unified

Videoconferencing 3545 MCU

The Cisco Unified Videoconferencing 3545 MCU works together with a Cisco Unified Videoconferencing 3545 EMP Enhanced Media Processor (EMP) module to perform audio and videoconferencing. The Cisco Unified Videoconferencing 3545 MCU is responsible for signaling and audio. The EMP is responsible for video. The Cisco Unified Videoconferencing 3545 MCU and EMP modules connect via the Ethernet.

Each Cisco Unified Videoconferencing 3545 MCU may be registered to up to three EMP modules on the same chassis.

For correct operation, the EMP card must register with the MCU.

This section describes the following topics:

•Physical Description of the Cisco Unified Videoconferencing 3545 MCU and EMP Modules, page 2-2

•Preparing to Install the 3545 MCU, page 2-3

•Verifying the Package Contents of the 3545 MCU, page 2-4

•Mounting the Cisco Unified Videoconferencing 3545 Chassis in a 19-inch Rack, page 2-4

•Installing the 3545 MCU and EMP, page 2-5

•Removing the 3545 MCU and EMP, page 2-7

•Initial 3545 MCU Configuration, page 2-8

•Initial 3545 EMP Configuration, page 2-13

•Accessing the 3545 MCU Administrator Interface, page 2-18

•Using the 3545 MCU Setup Wizard, page 2-19

•Registering the Online Help for the 3545 MCU, page 2-20

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Release 5.1

 

OL-11899-01

2-1

 

 

 

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Installing the Cisco Unified Videoconferencing 3545 MCU Component Description ACT LED Preparing to Install the 3545 MCUVerifying the Package Contents of the 3545 MCU Installing the 3545 MCU and EMP 157274 Removing the 3545 MCU and EMP Connecting to a PC Initial 3545 MCU ConfigurationSetting the IP Address Requirements Setting Ethernet Speed and Duplex Parameters Setting a Tftp Server Changing the Global User Name and Password Upgrading Cisco Unified Videoconferencing 3545 MCU Software Initial 3545 EMP ConfigurationSetting the IP Address Changing the Security Level Changing the Configuration Software PasswordPointing the EMP to the Controlling MCU Changing Advanced Configuration SettingsConnecting the EMP to the LAN Saving Network Configuration SettingsAccessing the 3545 MCU Administrator Interface Using the 3545 MCU Setup Wizard Netscape Navigator Users Registering the Online Help for the 3545 MCU
Top Page Image Contents