Cisco Systems manual Using the 3545 MCU Setup Wizard

Page 19

Chapter 2 Installing the Cisco Unified Videoconferencing 3545 MCU

Using the 3545 MCU Setup Wizard

Using the 3545 MCU Setup Wizard

The MCU setup wizard runs automatically the first time you access the MCU Administrator interface. In the setup wizard, you can configure addressing for the MCU IP, H.323 gatekeeper, and Session Initiation Protocol (SIP) proxy. In the setup wizard, you can also set the regional date and time settings of the device on which you manage the MCU.

Procedure

Step 1 In the Administrator interface, click MCU

Step 2 On the toolbar, click Setup Wizard.

The MCU Setup Wizard dialog box appears, displaying the Board Settings section.

Step 3 To change the IP address information with which the MCU is currently configured, follow these steps:

In the IP address field, enter the IP address you want to assign to the MCU.

In the Subnet mask field, enter the subnet mask you want to assign to the MCU.

In the Router IP address field, enter the IP address of the router that you want the MCU to use.

Click Next.

The H.323 Settings section appears.

Step 4 To set the gatekeeper you want the MCU to use, follow these steps:

In the Gatekeeper IP field, enter the IP address of the gatekeeper that you want the MCU to use.

In the Gatekeeper Port field, enter the port number that the MCU can use to communicate with the gatekeeper.

Click Next.

The SIP Settings section appears.

Step 5 To change SIP configuration, follow these steps:

In the Proxy IP field, enter the IP address for the SIP proxy.

In the Proxy Port field, enter the port for the SIP proxy.

In the Default Domain field, enter the default domain for the SIP proxy.

Select Using Microsoft LCS if the SIP proxy communicates with a Microsoft Live Communication Server device.

The Date and Time Settings section appears.

Step 6 To synchronize the MCU clock with the clock on the current computer, select Update to local time. Step 7 Click Finish.

 

 

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Release 5.1

 

 

 

 

 

 

OL-11899-01

 

 

2-19

 

 

 

 

 

Image 19
Contents Installing the Cisco Unified Videoconferencing 3545 MCU Component Description ACT LED Preparing to Install the 3545 MCUVerifying the Package Contents of the 3545 MCU Installing the 3545 MCU and EMP 157274 Removing the 3545 MCU and EMP Connecting to a PC Initial 3545 MCU ConfigurationSetting the IP Address Requirements Setting Ethernet Speed and Duplex Parameters Setting a Tftp Server Changing the Global User Name and Password Upgrading Cisco Unified Videoconferencing 3545 MCU Software Initial 3545 EMP ConfigurationSetting the IP Address Changing the Security Level Changing the Configuration Software PasswordPointing the EMP to the Controlling MCU Changing Advanced Configuration SettingsConnecting the EMP to the LAN Saving Network Configuration SettingsAccessing the 3545 MCU Administrator Interface Using the 3545 MCU Setup Wizard Netscape Navigator Users Registering the Online Help for the 3545 MCU