Netscape Navigator Users

Chapter 2 Installing the Cisco Unified Videoconferencing 3545 MCU

Registering the Online Help for the 3545 MCU

The online help files for the MCU Administrator and Conference Control interfaces are shipped on the Cisco Unified Videoconferencing Software CD-ROM. To use the online help, you must install the help files for the MCU in a shared directory on your network and register the directory location in the Administrator interface.

If you wish to install the online help on a shared network location and link it to the MCU Administrator, perform the following steps:

Procedure

Step 1 Copy the online help library from the Cisco Unified Videoconferencing Software CD-ROM to a shared folder on a PC on your network.

Step 2 Log in to the MCU Administrator interface.

Step 3 In the Online help URL field of the Board Web tab, enter the directory path to the help files you installed on your PC.

The path must have the form:

file://computerName/sharedDirectory

where computerName is the name of the computer on the network and sharedDirectory is the path to the Online Help folder on the CD-ROM. For example:

file://myComputer/Shared/Online Help

Step 4 Click Upload in the Cisco Unified Videoconferencing 3545 MCU Administrator toolbar, followed by Refresh.

Step 5 You may need to log out and log back in to the MCU Administrator for the change to take effect.

Online help files located on the local network and accessed using Netscape Navigator 4.x must be located on a mapped network drive.

	Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Release 5.1
2-20	OL-11899-01