Cisco Systems CB21AG manual Appendix B Translated Safety Warnings

Page 210

Appendix B Translated Safety Warnings

Warning for Laptop Users

Warning for Laptop Users

Warning This device has been tested and complies with FCC RF Exposure (SAR) limits in typical laptop computer configurations and this device can be used in desktop or laptop computers with side mounted PC Card slots that can provide at least 0.394 in (1 cm) separation distance from the antenna to the body of the user or a nearby person. Thin laptop computers may need special attention to maintain antenna spacing while operating. This device cannot be used with handheld PDAs (personal digital assistants). Use in other configurations may not ensure compliance with FCC RF exposure guidelines. This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter.

Waarschuwing Dit apparaat is getest en voldoet aan de FCC-beperkingen voor radiofrequentieblootstelling (SAR) bij standaardconfiguraties met een laptopcomputer. Dit apparaat kan worden gebruikt in desktop- of laptopcomputers met PC-kaartsleuven aan de zijkant, waarbij minimaal 1 cm afstand bestaat tussen de antenne en het lichaam van de gebruiker of een persoon in de buurt. Bij smalle laptopcomputers is mogelijk extra aandacht vereist om tijdens gebruik voldoende afstand tot de antenne te houden. Dit apparaat kan niet worden gebruikt in combinatie met mobiele PDA's (personal digital assistants; persoonlijke digitale assistenten). Als u dit apparaat gebruikt in andere configuraties, voldoet het wellicht niet meer aan de FCC-regelgeving met betrekking tot radiofrequentieblootstelling. Dit apparaat en de bijbehorende antenne mogen niet in combinatie met andere antennes of zenders worden gebruikt en ook niet in de buurt van andere antennes of zenders worden geplaatst.

Varoitus Tämä laite on testattu ja se noudattaa FCC:n määrittämiä radiotaajuussäteilylle altistumisen (SAR) raja-arvoja tyypillisissä kannettavien tietokoneiden kokoonpanoissa. Tätä laitetta voidaan käyttää pöytä- tai kannettavissa tietokoneissa, joiden sivussa on PC-korttipaikka. Korttipaikassa olevan laitteen antennin etäisyyden käyttäjästä tai lähellä olevasta henkilöstä on oltava vähintään yksi senttimetri. Ohuita kannettavia tietokoneita on ehkä tarkkailtava erityisesti, jotta käyttäjän etäisyys antenniin olisi riittävä käytön aikana. Tätä laitetta ei voi käyttää yhdessä kämmentietokoneiden (PDA) kanssa. Jos laitetta käytetään muunlaisissa kokoonpanoissa, se ei ehkä vastaa FCC:n määrittämiä radiotaajuussäteilylle altistumisen ohjearvoja. Tätä laitetta ja sen antennia ei saa käyttää samassa pisteessä toisen antennin tai lähettimen kanssa tai liitettynä toiseen antenniin tai lähettimeen.

Attention Cet appareil a été testé et respecte les limites (TAS - Taux d'absorption spécifique) d'exposition aux RF de la FCC relatives aux configurations standard des ordinateurs portables. Il peut être utilisé dans des ordinateurs de bureau ou portables dotés d'un emplacement pour carte PC latérales et peut fournir une distance de séparation d'au moins 1 cm entre l'antenne et le corps de l'utilisateur ou d'une personne avoisinante. Nous vous recommandons de porter une attention particulière lors de l'utilisation d'ordinateurs portatifs minces afin d'assurer le maintien de l'espacement de l'antenne. Cet appareil ne peut pas être utilisé avec des assistants numériques personnels de poche. L'utilisation dans d'autres configurations risque de ne pas être conforme aux lignes directrices de la FCC sur l'exposition aux RF. Cet appareil et son antenne ne doivent pas se trouver dans le même emplacement ou fonctionner conjointement avec une autre antenne ou un autre émetteur.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

 

B-4

OL-4211-03

 

 

 

Page 209 Page 211
Image 210
Page 209 Page 211
Contents Corporate Headquarters Customer Order Number Text Part Number OL-4211-03Copyright 2005 Cisco Systems, Inc All rights reserved N T E N T S IiiAssembling the Antenna Overview Pop-Up Menu Help Exit Select Profile ViiAntenna Installation Warning B-3 ViiiWPA OL-4211-03 Preface Following topics are covered in this sectionOrganization AudiencePurpose XiiConventions XiiiXiv Cisco.com Related PublicationsObtaining Documentation Documentation DVDDocumentation Feedback Cisco Product Security OverviewOrdering Documentation XviCisco Technical Support Website Reporting Security Problems in Cisco ProductsObtaining Technical Assistance An emergency, you can also reach Psirt by telephone 877 408Submitting a Service Request Definitions of Service Request SeverityXviii Obtaining Additional Publications and Information XixOL-4211-03 Product Overview Client Adapter Model Number Description Introduction to the Client AdaptersTerminology AIR-CB21AGRadio Antenna Hardware ComponentsRadio LEDsSoftware Components DriverClient Utilities Network Configurations Using Client Adapters Ad Hoc Wireless LANAccess Point Root Unit Wired LAN Preparing for Installation Safety information FCC Safety Compliance StatementSafety Guidelines Package Contents Unpacking the Client AdapterSystem Requirements Site Requirements For Infrastructure DevicesFor Client Devices OL-4211-03 Installing the Client Adapter Inserting a Client Adapter Inserting a PC-Cardbus CardInserting a PCI Card Changing the BracketBracket screws Inserting the Card Assembling the Antenna Inserting a PCI Card into a PCMounting the Antenna Inserting the Antenna into Its BaseBottom of Antenna Base Mounting the Antenna Installing the Client Adapter Software Preparing Setup Window Click Next. The Setup Type window appears see Figure Cisco Aironet Installation Program Window10 Setup Type Window 11 Install Cisco Aironet Site Survey Utility Window 12 Choose Destination Location Window 13 Select Program Folder Window 14 Important Please Read! Window Feature 15 Choose Configuration Tool WindowSecurity Static WEP Yes Leap or EAP-FAST authenticationWith dynamic WEP EAP-TLS or Peap authentication Yes ReceiveClick Properties Installing a Microsoft Hot Fix for Group Policy Delay Page OL-4211-03 Using the Profile Manager Overview of Profile Manager Opening Profile ManagerSSID2 Field DescriptionSSID1 SSID3Creating a New Profile Available Infrastructure and Ad Hoc Networks WindowSNR Profile Management General Window Including a Profile in Auto Profile Selection Auto Profile Selection Management WindowOL-4211-03 Selecting the Active Profile Editing a Profile Modifying a ProfileImporting and Exporting Profiles Deleting a ProfileImporting a Profile Exporting a ProfileExport Profile Window Configuring the Client Adapter Overview Parameter Category NumberSetting General Parameters Parameter Description Client adapter to roam to that network without having to be ReconfiguredAuto profile selection or configured for use in an ad hoc Auto profile selectionSetting Advanced Parameters Profile Management Advanced WindowRadio Band Transmit Power Level Profile Management Advanced Parameters Network Type Description Parameter Description Parameter Description Default Open Setting Security Parameters Preferred Access Points WindowOverview of Security Features Profile Management Security WindowStatic WEP Keys EAP with Dynamic WEP KeysConfiguring the Client Adapter Setting Security Parameters LEAP, EAP-FAST, EAP-TLS, Peap EAP-GTC, or Peap EAP-MSCHAP V2,WPA and WPA2 Cckm Fast Secure RoamingReporting Access Points that Fail Leap Authentication Security Feature Client Setting Access Point Setting Synchronizing Security FeaturesAdditional WEP Key Security Features SsidWPA Security Feature Client Setting Access Point Setting WPA/WPA2/CCKM LEAP, EAP-FAST, EAP-TLSOr later, choose a cipher suite that is MICPeap EAP-MSCHAP Enabling Static WEPTkip Interval to any value other thanConfiguring the Client Adapter Setting Security Parameters Enabling WPA/WPA2 Passphrase Define WPA/WPA2 Pre-Shared Key WindowEnabling Leap Leap Settings Window Configuring the Client Adapter Setting Security Parameters Configuring the Client Adapter Setting Security Parameters Enabling EAP-FAST EAP-FAST Settings Window Configuring the Client Adapter Setting Security Parameters Click Select More Select EAP-FAST PAC Window 10 Import EAP-FAST PAC File Window Configuring the Client Adapter Setting Security Parameters Deleting a Manually Provisioned PAC File Enabling EAP-TLS or Peap Enabling EAP-TLS 12 Define Certificate WindowConfiguring the Client Adapter Setting Security Parameters Enabling Peap EAP-GTC 13 Define Peap EAP-GTC Configuration Window 14 Configuration Settings Window Configuring the Client Adapter Setting Security Parameters 15 Define Peap EAP-MSCHAP V2 Configuration Window Enabling Peap EAP-MSCHAP16 Configuration Settings Window Configuring the Client Adapter Setting Security Parameters Configuring the Client Adapter Setting Security Parameters Configuring the Client Adapter Setting Security Parameters Enabling Wi-Fi Multimedia Disabling Static WEP, WPA/WPA2 Passphrase, or EAPEnabling the QoS Packet Scheduler on Windows 17 Wireless Cisco Connection Properties Window 18 Select Network Component Type Window Enabling the QoS Packet Scheduler on Windows XP Click Control Panel Double-clickNetwork ConnectionsSetting Roaming Parameters in the Windows Control Panel Follow these steps to access the roaming parametersWireless Mode Using EAP Authentication Using Leap or EAP-FAST Leap or EAP-FAST Authentication Status WindowAfter Profile Activation or Card Insertion Stage ExplanationAfter a Reboot or Logon After Your EAP-FAST Password ExpiresUsing Leap or EAP-FAST with an Automatically Prompted Login Enter Wireless Network Password Window After Your EAP-FAST Password Expires Using Leap or EAP-FAST with a Manually Prompted Login After Profile ActivationAfter a Reboot, Logon, or Card Insertion Action Drop-Down Menu After Your EAP-FAST Password Expires Using Leap or EAP-FAST with a Saved Username and Password Using EAP-TLS 10 Please Change Password WindowUsing Peap EAP-GTC Windows NT or 2000 Domain Databases or Ldap Databases OnlyOTP Databases Only Using Peap EAP-MSCHAP Restarting the Authentication ProcessOL-4211-03 Viewing Status and Statistics Status Statistics Overview of ADU Status and Statistics ToolsTool NumberDisplays the signal strength Signal-to-noise ratio as a percentageViewing the Current Status of Your Client Adapter 3interprets each element of the Current Status windowStatus Description Status Description Details on these server-based authentication types 4interprets each element of the Advanced Status windowMichael MIC is enabled and is being used with WPA and Tkip None MIC is disabledMIC is enabled and is being used with MMHWMM Status Description Status Description Cisco Aironet Desktop Utility Diagnostics Window Viewing Statistics for Your Client AdapterStatistic Description Advanced Statistics Window6interprets each element of the Advanced Statistics window Integrity check MIC value when Ckip was being used Ckip MIC OKPoint OL-4211-03 Using the Aironet System Tray Utility Astu Astu Icon Infrastructure mode or another client in ad hoc modeOverview of Astu Icon DescriptionTool Tip Window Status Element DescriptionConnection Status Description Help This option enables you to access the online helpPop-Up Menu Following sections describe each Astu pop-up menu optionOpen Aironet Desktop Utility TroubleshootingExit PreferencesEnable/Disable Radio Manual Login ReauthenticateSelect Profile Show Connection Status Connection Status WindowConnection Status Window Elements Ssid OL-4211-03 Routine Procedures Removing a Client Adapter Removing a PC-Cardbus CardRemoving a PCI Card Client Adapter Software Procedures Upgrading the Client Adapter SoftwarePrevious Installation Detected Window Choose Update the previous installation and click Next Uninstalling the Client Adapter Software Choose Uninstall the previous installation and click NextADU Procedures Opening ADUExiting ADU Finding the Version of ADU Viewing Client Adapter InformationRefer to for instructions on using Astu Astu ProceduresAccessing Online Help Enabling or Disabling Your Client Adapter’s RadioOL-4211-03 Troubleshooting 10-1Status LED green Activity LED amber Condition Accessing the Latest Troubleshooting InformationInterpreting the Indicator LEDs 10-2Troubleshooting Information Number Troubleshooting the Client AdapterUsing the Troubleshooting Utility Diagnosing Your Client Adapter’s OperationTroubleshooting Utility Window 10-4Troubleshooting Utility Window with Test Results 10-5Troubleshooting Utility Window Detailed Report 10-6Saving the Detailed Report to a Text File 10-7Client Adapter Recognition Problems Disabling the Microsoft 802.1X Supplicant Windows 2000 Only10-8 Resolving Resource Conflicts in Windows Reboot your computerResolving Resource Conflicts 10-9Problems Associating to an Access Point Resolving Resource Conflicts in Windows XP10-10 Parameters Missing from Profile Management Windows Problems Connecting to the NetworkPrioritizing Network Connections 10-11Error Messages 10-1210-13 10-14 10-15 10-16 10-17 10-18 10-19 10-20 10-21 10-22 10-23 10-24 Technical Specifications ESD Physical SpecificationsRadio Specifications KV human body modelAppendix a Technical Specifications DBm @ 24 Mbps Receiver sensitivity 802.11aDBm @ 6, 9, 12, and 18 Mbps DBm @ 36 MbpsIndoor typical Outdoor typical Power Specifications Safety and Regulatory Compliance SpecificationsTranslated Safety Warnings Explosive Device Proximity Warning Antenna Installation Warning Appendix B Translated Safety Warnings Appendix B Translated Safety Warnings Appendix B Translated Safety Warnings Declarations of Conformity and Regulatory Information Models AIR-CB21AG-A-K9, AIR-PI21AG-A-K9 USADepartment of Communications Canada Canadian Compliance StatementOL-4211-03 Cisco Aironet CB21AG Wireless LAN Client Adapter Declaration of Conformity StatementCisco Aironet PI21AG Wireless LAN Client Adapter Declaration of Conformity for RF Exposure Japanese TranslationEnglish Translation English Translation 5-GHz Client AdaptersChinese Translation Communication ACTGHz Client Adapters This equipment is limited for indoor useOL-4211-03 Channels, Power Levels, and Antenna Gains Channels Ieee 802.11aRegulatory Domains Ieee 802.11b/g Data Rate Maximum Power Levels and Antenna GainsIeee 802.11b With 1-dBi Antenna GainIeee 802.11g Mbps 31.6OL-4211-03 P E N D I X E Overview EAP with Dynamic WEP Keys WPA Configuring the Client Adapter Configuring the Client Adapter Page Configuring the Client Adapter Page Enabling EAP-TLS Authentication For EAP type, choose Smart Card or other Certificate Configuring the Client Adapter Enabling Peap Authentication Figure E-6 Protected EAP Properties Window Figure E-7 EAP MSCHAPv2 Properties Window Figure E-8 Peap Properties Window Figure E-9 Generic Token Card Properties Window Associating to an Access Point Using Windows XP Figure E-10 Wireless Network Connection Status WindowPerforming a Site Survey Guidelines Additional InformationOpening the Site Survey Utility Selecting the Client AdapterUsing the Associated AP Status Tab Specifying Display UnitsViewing the Access Point’s Status Table F-1 Site Survey Utility Associated AP Status Description Using the AP Scan List Tab Viewing the AP Scan List Figure F-5 Site Survey Utility AP Scan ListRssi Pausing the AP Scan List CCXValue 1, 2, 3, or Access point’s wireless network Viewing AP DetailsDetailed Information Parameter Description Rssi Generating an AP Scan Log File Figure F-7 Site Survey Utility Log FileFinding the Version of the Site Survey Utility Accessing Online HelpUninstalling the Site Survey Utility Exiting the Site Survey UtilityPage Standard Wireless network composed of stations without access pointsStations Set of characters that contains both letters and numbersGL-2 Setting must be within the range of 64 to 2312 bytes GL-3Ethernet 802.3 and wireless LAN 802.11 specifications GL-4GL-5 GL-6 802.1X for authenticated key management Computing device with an installed client adapterProtection and 802.1X for authenticated key management GL-7GL-8 Authentication Mode parameter Selecting in ADUIN-1 Selecting the active profile Pausing ViewingADU IN-2Astu CAMIN-3 FCC C-2 ADU Windows XPData encryption ADU Site survey utility IN-4IN-5 ACK CTS CRCFCC RTSIN-7 Status With Leap Modify button Disabling EnablingMMH MIC IN-8IN-9 IN-10 IN-11 IN-12 Regulatory compliance Safety Spread spectrum Setting Viewing ADUIN-13 With test results Third-party tool, enabling in Install WizardInitial window IN-14Security features IN-15IN-16
Related manuals
Manual 34 pages 15 Kb Manual 22 pages 28.37 Kb Manual 170 pages 950 b Manual 22 pages 55.14 Kb
Top Page Image Contents