Cisco Systems CB21AG Enabling Static WEP, Tkip, Peap EAP-MSCHAP, Interval to any value other than

Chapter 5 Configuring the Client Adapter

Setting Security Parameters

Table 5-4	Client and Access Point Security Settings (continued)
Security Feature		Client Setting	Access Point Setting
TKIP		No settings required; automatically	Set up and enable WEP, set TKIP to
		enabled	Cisco or check the Enable Per
			Packet Keying check box, and set
			Use Aironet Extensions to Yes
Broadcast key rotation		Enable LEAP, EAP-FAST,	Set up and enable WEP and set
		EAP-TLS, PEAP (EAP-GTC), or	Broadcast WEP Key Rotation
		PEAP (EAP-MSCHAP V2)	Interval to any value other than
			zero (0)

Enabling Static WEP

Follow the steps below to enable static WEP for this profile.

Step 1 Choose Pre-Shared Key (Static WEP) on the Profile Management (Security) window.

Step 2 Click Configure. The Define Pre-Shared Keys window appears (see Figure 5-5).

Figure 5-5 Define Pre-Shared Keys Window

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

5-24 OL-4211-03