Starting Your LifeBook Notebook | Fujitsu Siemens Computers A6020

(See Power On Self Test

fennec2.book Page 25 Thursday, December 21, 2006 12:43 PM

Starting Your

LifeBook Notebook

POWER ON

Power/Suspend/Resume Button

The Power/Suspend/Resume button is used to turn on your LifeBook notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your LifeBook notebook. (See figure 2-3 on page 6 for location)

When you turn on your LifeBook notebook be sure you have a power source. This means that at least one battery is installed and charged, or that the AC or Auto/Airline adapter is connected and has power.

To turn on your LifeBook notebook from its off state, press the Power/Suspend/Resume button, located above the keyboard to the right. When you are done working you can either leave your LifeBook notebook in Standby mode, (See Standby Mode on page 27 for more informa- tion), or you can turn it off (See Power Off on page 28 for more information).

Do not carry your LifeBook notebook around with the power on or subject it to shocks or vibration, as you risk damaging your hard disk drive.

When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your LifeBook notebook will emit an audio warning and/ or an error message will be displayed. (See Power On Self Test Messages on page 55 for more information) Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings.

After satisfactory completion of the Power On Self Test (POST), your notebook will load your operating system.

Never turn off your LifeBook notebook during the Power On Self Test (POST) or it will cause an error message to be displayed when you turn your LifeBook notebook on the next time.

Messages on page 55 for more information)

G e t t i n g S t a r t e d

BOOT SEQUENCE

The procedure for starting up your notebook is called the Bootup sequence and involves your notebook’s BIOS. When your LifeBook notebook is first turned on, the main system memory is empty, and it needs to find instructions to start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST). If the sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen.

The boot sequence is executed when:

■You turn on the power to your LifeBook notebook.

■You restart your notebook from the Windows Shut Down dialog box.

■The software initiates a system restart. Example: When you install a new application.

HARD DISK DRIVE PASSWORDS

To provide additional data security, you can assign pass- words to your hard disk drive. This feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about accessing the utility.

Remember your passwords. If you set and forget your User and Master hard disk passwords, Fujitsu Computer Systems will not be able to reset it. You may lose data and have to replace your system board or hard disk drive.

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS’ environment to operate your notebook.

The BIOS Setup Utility configures:

■Device control feature parameters, such as changing I/O addresses and boot devices.

■System Data Security feature parameters, such as passwords.

Entering the BIOS Setup Utility

To enter the BIOS Setup Utility do the following:

1.Turn on or restart your LifeBook notebook.

2.Press the [F2] key when the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with current settings displayed.

A6020 specifications

The Fujitsu Siemens Computers A6020 is a desktop PC that exemplifies the combination of power and efficiency, catering primarily to small businesses and home office users. Launched in the early 2000s, it was designed to meet the growing demand for reliable computing solutions with a focus on affordability without compromising performance.

At its core, the A6020 is powered by a range of Intel processors, offering a variety of options to suit different user needs. Depending on the configuration, it can be equipped with Intel Pentium 4 or Intel Celeron processors, providing a solid balance of speed and efficiency for everyday tasks such as word processing, spreadsheets, and basic multimedia applications.

One of the standout features of the A6020 is its flexible expandability. With multiple expansion slots, users can easily upgrade their system to enhance performance, whether by adding more RAM or incorporating additional storage solutions. The machine typically supports up to 2GB of DDR memory, which was a considerable amount at the time, allowing users to run multiple applications simultaneously with ease.

In terms of storage, the A6020 comes with a variety of hard drive options, usually ranging from 40GB to 120GB. This ample capacity makes it suitable for users who need to store documents, presentations, and media files without immediate concern for running out of space. Moreover, the inclusion of optical drives gives users the capability to read and write CDs, a valuable function during an era where physical media was still prevalent.

Networking capabilities are also a key feature of the A6020. Equipped with Ethernet ports and optional wireless capabilities, it allowed users to easily connect to local networks and the internet, facilitating communication and data sharing in an increasingly digital workspace.

The design of the A6020 prioritizes user-friendliness, featuring a simple yet effective layout that allows for easy access to components and ports. The compact form factor ensures that it fits comfortably in various workspace environments, promoting efficient use of space.

Overall, the Fujitsu Siemens Computers A6020 represents a thoughtful combination of performance, expandability, and usability, making it a suitable choice for individuals and small businesses looking for a reliable desktop solution during its time in the early 2000s.