Fujitsu Siemens Computers 19P2 Installing an ergonomic video workstation, Connecting the monitor

Page 16

Colour monitor 19P2

Installing an ergonomic video workstation

Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advises when installing a video workstation.

Window

Avoid direct and reflected glare.

Avoid glare from electric lighting.

edge of desk

 

permissible

permissible

reaching sector

reaching sector

600 mm

600 mm

Position the keyboard where it is easiest to reach.

preferable viewing sector

65°

60°

30°

30°

permissible

65°

viewing sector

 

permissible viewing sector

Position the monitor for

Keep ventilated areas clear.

optimum viewing. The viewing distance to the monitor should be approximately 50 cm.

approx. 90°

approx. 90° and more

Remember to maintain correct posture.

Connecting the monitor

Information on the computer connections is contained in the operating manual for your computer.

!

Please note the information provided in the "Safety" section in the chapter "Important

notes" at the beginning of this manual.

 

Do not cover the ventilation openings of the monitor.

If you are assembling monitors beside each other, there must be a minimum distance of 30 cm between monitors of the same constructional type, to avoid image distortion. With different monitors, the distance must be increased, if necessary.

8 - English

A26361-K713-Z100-1-5E19

Image 16
Contents 19P2 Sie haben Page A26361-K713-Z100-1-5E19 Betriebsanleitung Operating Manual Ausgabe Januar 2001 January 2001 editionPage Contents Page Introduction Notational conventionsTarget group Further informationSafety Important notesCleaning TransportRay radiation FCC Class B Compliance StatementPower cable for devices distributed in the US and Canada Important note on power cableFor the United Kingdom Declaration of Conformity CE certificate Energy Star GuidelinesDisposal and recycling Checking the contents of the consignment Installing an ergonomic video workstation Connecting the monitorColour monitor 19P2 Switching the monitor off Switching the monitor onOperation of the monitor Changing the monitor settings Stage Energy-saving modeAdjusting the brightness and contrast Settings with the OSD menu Adjusting size and positionSetting the picture geometry Adjusting the coloursMaking picture corrections Setting advanced options Setting the OSD menu and displaying monitor informationTechnical data Dimensions and weightAccessories Storable display modesElectrical data VESA-DDC-compatible VGA interfaceEnvironmental conditions Pin assignment D-SUB 15-pin Preset operating modesPin Meaning Error handling Tilting and turning areaMuffled noise can be heard after switch-on Colours are impureWhite does not look white Screen display has lines Moiré, is dull or blurred