Colour monitor 19P2
Preset operating modes
The picture position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").
Horizontal frequency | Refresh rate | Screen resolution | |
|
|
|
|
31.5 kHz ± 0.5 kHz | 60 Hz ± | 2 Hz | 640 x 480 |
31.5 kHz ± 0.5 kHz | 70 Hz ± | 2 Hz | 720 x 400 |
50,6 kHz ± 0.5 kHz | 100 Hz ± | 2 Hz | 640 x 480 |
53.7 kHz ± 0.5 kHz | 85 Hz ± | 2 Hz | 800 x 600 |
63.0 kHz ± 0.5 kHz | 100 Hz ± | 2 Hz | 800 x 600 |
68.7 kHz ± 0.5 kHz | 85 Hz ± | 2 Hz | 1024 x 768 |
80.8 kHz ± 0.5 kHz | 100 Hz ± | 2 Hz | 1024 x 768 |
91.2 kHz ± 0.5 kHz | 85 Hz ± | 2 Hz | 1280 x 1024 |
93.1 kHz ± 0.5 kHz | 100 Hz ± | 2 Hz | 1152 x 864 |
|
|
|
|
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of 1024 x 1280 pixels.
Pin assignment D-SUB (15-pin)
5 1
6
10
15 11
Pin | Meaning |
|
|
1 | Red video input |
|
|
2 | Green video input / Sync. on green |
|
|
3 | Blue video input |
|
|
4 | Monitor ground |
|
|
5 | DDC Return |
|
|
6 | Red video ground |
|
|
7 | Green video ground |
|
|
8 | Blue video ground |
|
|
Pin | Meaning |
|
|
9 | 5 V for DDC |
|
|
10 | Logic ground |
|
|
11 | Monitor ground |
|
|
12 | DDC data (SDA) |
|
|
13 | H. sync (H/V comp. Sync.) |
|
|
14 | V. sync |
|
|
15 | DDC Clock |
| (SCL) |
|
|
English - 19 |