Setting the picture geometry

Colour monitor 19P2

Setting picture size (Size)

!" = Making the picture narrower or wider

$# = Making the picture shorter or longer

Setting full-screen display (Zoom)

! " = Increasing or reducing the size of the screen display

Trapezoid distortion is when the top or bottom of the screen display is too wide or too narrow. Parallelogram distortion means that the sides of the picture bend to the left or right. Tilt distortion must be set when the screen display is not axially symmetrical. Unsymmetrical pin balance is when the sides of the screen displays are bent inward or outward on one side. Vertical linearity must be set when the screen display appears distorted at the top or bottom.

Calling the Geometry setting window

Correcting parallelogram and tilt distortion (Parallel/Rotation )

!" = Reducing the angle of the left and right sides

		$ # = Rotating the picture in a clockwise or counter-clockwise direction
		Correcting pincushion and trapezoid distortion (Pincushion/Trapezoid )
)	(
)	(	! " = Bending the right and left side inward or outward
		! " = Bending the right and left side inward or outward

$# = Making the bottom edge narrower and the top edge wider or making the top edge narrower and the bottom edge wider

Correcting unsymmetrical pincushion distortion (Pinbalance)

!" = Setting the sides so that they are symmetrical Adjusting the vertical linearity (Linearity)

!" = Correcting compression distortion at the top or bottom of the display

Adjusting the colours

RGB

Setting colour temperature (Color)

The "warmth" of the screen colours is set using the colour temperature. The monitor has three fixed colour temperatures (K = Kelvin).

Color 1 = 9300 K (factory setting)

Color 2 = 6500 K (factory setting)

Color 3 = 5000 K (factory setting)

You can adjust the colour temperature in 100-K steps in the range from 5000 K to 9300 K (! ") or select ($ #) and adjust the proportion of red, green and blue as required (! ").

14 - English

A26361-K713-Z100-1-5E19