Fujitsu Siemens Computers 19P2 manual VESA-DDC-compatible VGA interface, Electrical data

Colour monitor 19P2

Electrical data
Video:	analogue, positive, 0.7 Vpp, 75 Ohm
Synchronisation:	Separate Sync. TTL
	Composite Sync. TTL/ Sync. on Green
Horizontal frequency:	30 kHz .... 96 kHz (multi-scanning)
Refresh rate:	50 Hz .... 160 Hz
Maximum pixel rate:	207 MHz
Power supply:	switches automatically
	100 V - 127 V, 50 Hz - 60 Hz ±	3 Hz, < 2 A
	200 V -240 V, 50 Hz - 60 Hz ±	3 Hz, < 1 A
Power consumption:	< 100 W (ON, Normal mode)
(see power management):	< 3 W in the energy-saving mode (standby mode,
	suspend mode and OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:	15 °C .... 35 °C
Humidity:	20 % .... 85 %
Limit range of operation:	5 °C .... 40°C
Humidity:	20 % .... 85 %

Condensation must be avoided.

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor 19P2 is not yet displayed in the list of monitors, you can select one of the
	following monitors instead:
	Fujitsu Siemens, Siemens or Siemens Nixdorf MCM 2109, MCM 2107, MCM 2105,
	MCM 2102, MCM 1902, MCM 19P1/19P1N, MCM 17P1, MCM 17P2, 17P3, MCM 1702,
	MCM 1703, MCM 1704, MCM 1705, MCM 1706, MCM 1707, x178

18 - English A26361-K713-Z100-1-5E19