![](/images/new-backgrounds/1174485/17448537x1.webp)
Colour monitor 19P2
Notes on power management
If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual
Stage | ON |
|
|
|
|
Power indicator | glows green | flashes green |
|
|
|
Function | Monitor operating | Monitor |
| normally | is dark |
|
|
|
Power consumption | normal | reduced |
| < 100 W | to < 3 W |
|
|
|
If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption. The power indicator of the monitor changes colour to indicate the status change.
If there is still no input, power consumption is further reduced (OFF mode).
Once an input is made at the computer the screen contents are redrawn and full power is restored.
The length of the individual stages is determined by the power management system of the computer. For detailed information on how
i | The service life of your monitor will be extended if the OFF mode is switched to after |
30 minutes at the earliest (setting in screen saver or in your computer's BIOS setup). | |
| When the monitor is switched to OFF mode by the power management system a power |
| consumption of up to 3 W is maintained to feed the circuit for redrawing the screen |
| contents. To cut off power consumption totally, press the ON/OFF switch on the front of |
| the monitor. |
Changing the monitor settings
With the buttons on the control panel, you can change the monitor settings. Contrast and brightness are adjusted directly with the corresponding buttons. The other settings are carried out via an integrated OSD menu
The OSD menu is available in different languages. The English menu names are used in i the following description (default setting). The language can be set in the OSD menu
(Languages).
English - 11 |